Singer Tradition Sewing Machine 2277 Manual

The Singer Tradition 2277 is a versatile mechanical sewing machine designed for home use, featuring 23 built-in stitches, a 4-step buttonhole, adjustable stitch length and width, free arm capability, built-in needle threader, top drop-in bobbin system, and reverse sewing function. It operates on 110-120V AC and includes essential accessories. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Mechanical sewing head, Stitch selection dial, Stitch length and width controls, Reverse lever, Free arm, Built-in needle threader, Top drop-in bobbin system, Foot pedal, Power cord.

Unpacking and Setup

Unpack and inspect contents. Place on stable table.

1. Remove machine from box: Lift by carrying handle; place on flat surface.
2. Attach foot pedal: Connect pedal cord to machine port.
3. Connect power: Plug power cord into machine and wall outlet (110-120V).
4. Install needle: Loosen needle clamp screw, insert needle flat side back, tighten.
5. Wind bobbin: Place thread on spool pin, guide through bobbin winder tension, press pedal.
6. Insert bobbin: Drop bobbin into case with thread clockwise; pull thread through slot.

WARNING! Keep fingers away from needle area during setup. Ensure machine is off when plugging in.

First-Time Operation

Power on machine; follow threading guide.

1. Thread upper thread: Follow numbered path on machine; use built-in threader.
2. Raise presser foot: Use lever to open tension discs.
3. Pull up bobbin thread: Hold upper thread, turn handwheel toward you to bring up bobbin thread.
4. Select stitch: Turn stitch dial to desired pattern (e.g., straight stitch).
5. Adjust settings: Set stitch length to 2.5 mm, width to 0 for straight stitch.
6. Test sew: Place fabric under foot, lower foot, press pedal gently.

CAUTION! Always lower presser foot before sewing. Keep hands clear of moving needle.

Specifications

• Model: Singer Tradition 2277.
• Type: Mechanical sewing machine.
• Stitches: 23 built-in stitches.
• Buttonhole: 4-step manual.
• Stitch Length: Adjustable 0-4 mm.
• Stitch Width: Adjustable 0-5 mm.
• Bobbin: Top drop-in, Class 15 transparent.
• Needle: Standard domestic needle system 130/705H.
• Power Supply: 110-120V AC, 60Hz.
• Included Feet: All-purpose foot, buttonhole foot, zipper foot, button sewing foot.

Controls and Settings

Access controls on front and top of machine. Stitch Selection Dial: Turn to select stitch pattern (1-23). Stitch Length Dial: Adjust for shorter/longer stitches. Stitch Width Dial: Adjust for wider/narrower zigzag. Reverse Lever: Hold to sew backward. Handwheel: Manual control; turn toward you. Presser Foot Lever: Raises/lowers foot. Tension Dial: Adjust upper thread tension (3-5 for normal fabrics).

Quick Guide: For straight stitch: Select pattern 1, length 2.5, width 0. For zigzag: Select pattern 2, adjust width as needed.

Stitch Selection and Adjustment

Use stitch dial to choose from 23 patterns: straight, zigzag, blind hem, stretch, decorative.

1. Turn dial to desired number (see chart on machine).
2. Adjust length: Higher number = longer stitch.
3. Adjust width: For zigzag and decorative stitches.
4. Test on scrap fabric before sewing project.

Tip: Refer to stitch guide printed on machine for recommended settings.

Basic Sewing Techniques

Supports basic seams, hems, buttonholes, zippers.

1. Straight seam: Use stitch 1, length 2.5, foot pressure normal.
2. Zigzag finish: Use stitch 2, width 3-4, to prevent fraying.
3. Buttonhole: Attach buttonhole foot, select pattern 0, follow 4-step process.
4. Blind hem: Use stitch 5, fold fabric as per manual.
5. Reverse: Hold lever at start/end to lock stitches.
6. Free arm: Remove accessory tray for cylindrical items.

WARNING! Do not pull fabric; let feed dogs move it. Use correct foot for each technique.

Maintenance and Cleaning

Unplug before maintenance. Clean lint regularly with brush.

1. Remove needle plate screws; lift plate.
2. Use brush to clean feed dogs and bobbin area.
3. Oil sparingly per manual instructions (if required).
4. Wipe exterior with dry cloth.

CAUTION! Do not use compressed air; avoid oil on rubber parts. Replace needle regularly.

Accessories Included

• All-purpose foot
• Buttonhole foot
• Zipper foot
• Button sewing foot
• Class 15 bobbins (3)
• Needles (assorted)
• Seam ripper/lint brush
• Screwdriver
• Spool pin felt
• Instruction manual

Safety Information

Always unplug when not in use, during threading, or changing needle. Keep fingers away from needle. Do not sew over pins. Use proper ventilation. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Reset: Turn off, unplug for 1 minute, then restart.

Service: 1-800-4-SINGER; www.singer.com