Singer Tradition 2250 Manual

The Singer Tradition 2250 is a versatile mechanical sewing machine designed for home use, featuring 100 built-in stitches, a one-step buttonhole, automatic needle threader, adjustable stitch length and width, free arm capability, built-in needle plate seam guides, and a heavy-duty metal frame. It operates on 110-120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection and Use 7. Basic Sewing Techniques 8. Maintenance and Cleaning 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Sewing machine head, Free arm, Stitch selection dial, Stitch length/width controls, Bobbin winder, Spool pins, Presser foot, Needle plate, Foot pedal, Power cord.

Feature	Description
Built-in stitches	100 stitches including utility, decorative, and stretch
One-step buttonhole	Automatically creates buttonholes in one step
Automatic needle threader	Easily threads the needle
Adjustable stitch length/width	Customize stitch size for different fabrics
Free arm	For sewing cylindrical items like sleeves and cuffs
Heavy-duty metal frame	Provides stability and durability
Built-in needle plate guides	Helps maintain straight seams
Drop feed dogs	For free-motion sewing and darning
Reverse stitch lever	Reinforces seam beginnings and ends
LED light	Illuminates the sewing area

Unpacking and Setup

Unpack and inspect contents. Place on stable surface.

Remove machine from packaging: Lift carefully from case.
Attach foot pedal: Connect to machine port.
Plug into power: Connect power cord to machine and wall outlet (110-120V).
Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten.
Wind bobbin: Place thread on spool pin, guide through bobbin winder tension, press pedal.
Insert bobbin: Open bobbin case, insert bobbin with thread clockwise, pull thread through slot.

WARNING! Machine is heavy; lift with care. Ensure stable surface to prevent tipping.

First-Time Operation

Power on machine; follow setup steps.

Thread upper thread: Follow numbered guides from spool to needle, use automatic needle threader.
Pull up bobbin thread: Hold upper thread, turn handwheel toward you to bring up bobbin thread.
Select stitch: Turn stitch selection dial to desired pattern.
Adjust settings: Set stitch length (0-4 mm) and width (0-5 mm) as needed.
Test sew: Place fabric under presser foot, lower foot, gently press pedal to sew.

CAUTION! Keep fingers away from needle during operation. Always turn off when not in use.

Specifications

Type: Mechanical sewing machine.
Built-in Stitches: 100 stitches.
Buttonhole: One-step automatic.
Needle Threader: Automatic.
Stitch Length: Adjustable 0-4 mm.
Stitch Width: Adjustable 0-5 mm.
Free Arm: Yes, convertible.
Frame: Heavy-duty metal interior.
Power Source: 110-120V AC, 60Hz.
Max Sewing Speed: 750 stitches per minute.
Weight: Approximately 13.2 lbs (6 kg).

Controls and Settings

Main Controls: Stitch selection dial, Stitch length dial, Stitch width dial, Reverse stitch lever, Handwheel, Bobbin winder, Presser foot lifter, Drop feed dogs lever.

Stitch Selection: Turn dial to select from 100 stitches (numbered 1-100). Stitch Length: Adjust for fabric thickness (higher number = longer stitch). Stitch Width: Adjust for zigzag and decorative stitches. Reverse Stitch: Hold lever to sew backwards for reinforcement. Presser Foot Pressure: Adjustable for different fabrics (via screw on top).

Stitch Selection and Use

Select stitches via dial; adjust length/width.

Straight stitch: Use for seams, topstitching (length 2-3 mm).
Zigzag stitch: Use for finishing edges, appliqué (adjust width as needed).
Decorative stitches: Select patterns 10-50 for embellishments.
Stretch stitches: Use for knit fabrics (patterns 60-80).
Buttonhole: Select buttonhole stitch, place button in foot, machine sews automatically.

Tip: Test stitch on fabric scrap before sewing project.

Basic Sewing Techniques

Follow steps for common tasks.

Seam sewing: Align fabric edges, lower presser foot, sew forward, reverse at start/end.
Edge finishing: Use zigzag or overcast stitch along raw edges.
Buttonhole: Mark button placement, use one-step buttonhole foot.
Zipper insertion: Use zipper foot for centered or invisible zippers.
Free-motion sewing: Drop feed dogs, use darning foot for quilting or darning.
Gathering: Use longer straight stitch, pull bobbin thread to gather.

WARNING! Always use correct presser foot for technique. Do not force fabric.

Maintenance and Cleaning

Unplug before maintenance. Clean lint and dust regularly.

Remove needle plate: Use screwdriver to lift plate, clean lint from bobbin area.
Oil machine: Apply sewing machine oil to moving parts as per manual (every few months).
Clean exterior: Use dry cloth; avoid liquids.
Replace needle: Change needle after every project or if dull/bent.
Check belt: Ensure drive belt is intact and properly tensioned.

CAUTION! Do not use compressed air; it can force lint deeper. Use only sewing machine oil.

Safety Information

Read all instructions before use. Keep away from children. Unplug when not in use, during maintenance, or when changing accessories. Do not operate with damaged cord or plug. Use only Singer accessories. Avoid using near water. Do not disassemble machine; contact authorized service for repairs.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not run	Power cord, pedal, switch	Check power connection; ensure pedal plugged in; turn power switch on.
Thread breaks	Thread tension, needle, threading	Rethread top and bobbin; replace needle; adjust tension.
Needle breaks	Wrong needle, bent needle, fabric pull	Replace with correct needle type; do not pull fabric; ensure needle inserted fully.
Uneven stitches	Thread tension, threading, lint	Clean lint; rethread; adjust tension dial.
Fabric not feeding	Feed dogs lowered, presser foot pressure	Raise feed dogs; adjust presser foot pressure; clean feed dogs.
Bobbin thread not picking up	Bobbin insertion, threading	Reinsert bobbin; ensure thread in tension spring; turn handwheel slowly.
Machine jams	Thread jam, lint buildup	Unplug, remove needle plate, clear jammed thread and lint.

Service: For repairs, contact authorized Singer service center. Visit www.singer.com or call 1-800-4-SINGER.