Singer Tradition 2250 Instruction Manual

The Singer Tradition 2250 is a versatile sewing machine designed for home use, featuring 100 built-in stitches, automatic needle threader, adjustable stitch length and width, drop-in bobbin system, built-in buttonhole styles, free arm capability, and multiple presser feet. Powered by standard household electrical outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection and Adjustment 8. Maintenance and Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Sewing machine head, Foot pedal, Power cord, Accessory box with presser feet, Bobbins, Needles, Seam ripper, Spool caps, Instruction manual.

Feature	Description
Built-in Stitches	100 stitches including utility, decorative, and stretch
Automatic Needle Threader	Easy threading with push-pull lever
Drop-in Bobbin System	Top-loading, clear cover for bobbin monitoring
Stitch Length/Width Control	Adjustable via dials for customization
Buttonhole Styles	6 one-step automatic buttonholes
Free Arm	Removable extension table for cylindrical sewing
Presser Feet	Includes all-purpose, zipper, buttonhole, button sewing feet
Speed Control	Adjustable sewing speed via slide control
Reverse Stitch Lever	For reinforcing seams
LED Light	Illuminates sewing area

Unpacking and Setup

Unpack and inspect all contents. Place on stable, flat surface.

Remove machine from packaging: Lift carefully from carrying case.
Attach power cord: Plug into machine and wall outlet.
Install foot pedal: Connect to machine port, place on floor.
Attach extension table: Snap into place for flat sewing surface.
Wind bobbin: Follow bobbin winding instructions.

WARNING! Machine is heavy; lift with both hands. Ensure power is off during setup.

First-Time Operation

Power on machine; follow initial setup steps.

Thread machine: Use automatic needle threader or manual threading path.
Insert bobbin: Place in bobbin case with thread unwinding counterclockwise.
Select stitch: Turn stitch selection dial to desired pattern.
Adjust settings: Set stitch length and width as needed.
Test sew: Use scrap fabric to check tension and stitch formation.

CAUTION! Keep fingers away from needle area during operation. Always turn off when not in use.

Specifications

Model: Singer Tradition 2250
Stitches: 100 built-in stitches
Buttonholes: 6 one-step automatic
Stitch Length: Adjustable up to 4mm
Stitch Width: Adjustable up to 5mm
Bobbin: Class 15 transparent
Needle: HAx1 sewing machine needle
Power Supply: 110-120V, 60Hz
Machine Weight: Approximately 13.2 lbs (6 kg)
Warranty: 25-year limited warranty

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, Stitch length dial, Stitch width dial, Reverse stitch lever, Thread tension dial.

Side Features: Handwheel, Bobbin winder spindle, Power switch, Foot pedal jack.

Stitch Selection: Turn dial to choose from 100 stitches (numbered 1-100). Stitch Length: Adjust from 0-4mm (0 for darning). Stitch Width: Adjust from 0-5mm (0 for straight stitch). Thread Tension: Adjust dial for balanced stitches (default 4). Reverse Stitching: Hold lever for backstitching at beginning/end of seams.

Stitch Selection and Adjustment

Machine offers utility, decorative, and stretch stitches.

Select stitch type: Turn dial to desired number (refer to stitch chart).
Adjust length: For longer stitches, increase length dial.
Adjust width: For zigzag or decorative stitches, increase width dial.
Test on scrap: Always test settings on similar fabric.
Buttonholes: Select buttonhole stitch, place fabric under foot, machine completes automatically.

Tip: Refer to stitch guide for recommended settings for different fabrics.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

Unplug machine before cleaning.
Remove needle plate: Use screwdriver to access bobbin area.
Clean lint: Use small brush to remove lint from feed dogs, bobbin case, and hook area.
Oil machine: Apply 1-2 drops of sewing machine oil to hook race as per manual (do not over-oil).
Replace needle: Change needle after every 8-10 hours of sewing or for new project.

CAUTION! Never use compressed air; it can force lint deeper. Use only sewing machine oil.

Regulatory Information

FCC Compliance: Class B digital device; complies with Part 15 of FCC rules. UL Listed: Meets safety standards. Copyright © Singer Manufacturing Company. All trademarks property of Singer. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not running	Power connection	Check power cord connections; ensure foot pedal is plugged in.
Needle breaks	Incorrect needle/thread	Use correct needle for fabric; ensure needle is properly inserted.
Thread bunching underneath	Incorrect threading/bobbin	Rethread top and bobbin threads; ensure bobbin inserted correctly.
Uneven stitches	Tension issues	Adjust thread tension; rethread completely; clean machine.
Fabric not feeding	Feed dogs lowered	Check feed dog position; clean feed dogs; adjust presser foot pressure.
Buttonhole not forming	Improper setup	Ensure buttonhole foot is attached; fabric is stabilized; follow buttonhole steps.

Reset: Turn off machine, unplug for 2 minutes, then restart.

Service: 1-800-4-SINGER; www.singer.com for authorized service centers.