Singer Simple Sewing Machine 3337 Manual

The Singer Simple 3337 is a mechanical sewing machine designed for beginners and everyday sewing. It features 23 built-in stitches, a 4-step buttonhole, adjustable stitch length and width, built-in needle threader, top drop-in bobbin system, free arm capability, and includes essential accessories. Powered by a standard household outlet. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sewing machine head, foot pedal, power cord, accessory box, instruction manual.

Unpacking & Setup

Unpack and inspect contents. Place on a stable, flat surface.

1. Remove all packaging materials and protective covers.
2. Attach the foot pedal: Connect the pedal cord to the machine's pedal jack.
3. Connect power: Plug the power cord into the machine and then into a standard 120V outlet.
4. Install the accessory tray: Snap into place on the free arm area.
5. Wind and insert the bobbin: Follow the threading diagram on the machine.
6. Thread the upper thread: Use the built-in needle threader for assistance.

WARNING! Keep fingers away from the needle area during operation. Always unplug the machine when not in use or during maintenance.

First-Time Operation

Plug in the machine and turn the handwheel toward you to raise the needle to its highest position.

1. Select a stitch: Turn the stitch selector dial to the desired pattern (e.g., straight stitch).
2. Place fabric: Lower the presser foot lever to hold fabric in place.
3. Start sewing: Gently press the foot pedal to begin. Control speed with pedal pressure.
4. Reverse stitching: Hold the reverse lever to sew backward for seam reinforcement.
5. Finish: Raise the needle, lift the presser foot, and pull the fabric gently to the back.
6. Cut threads: Use the built-in thread cutter on the back of the needle plate.

CAUTION! Do not force the handwheel. If it becomes difficult to turn, check for thread jams or incorrect bobbin placement.

Specifications

• Model: Singer Simple 3337
• Type: Mechanical Sewing Machine
• Stitches: 23 Built-in stitches
• Buttonhole: 4-step manual buttonhole
• Max Stitch Length: 4 mm
• Max Stitch Width: 5 mm
• Bobbin: Class 15 transparent top drop-in
• Needle: Singer system 130/705H needles
• Power Supply: 120V, 60Hz
• Included Accessories: All-purpose foot, zipper foot, buttonhole foot, seam ripper, needles, bobbins, duster, auxiliary spool pin

Controls and Settings

Main Controls: Stitch Selector Dial, Stitch Length Dial, Stitch Width Dial, Reverse Stitch Lever, Tension Control Dial, Handwheel.

Stitch Selection: Turn dial to corresponding stitch number. Refer to stitch chart on machine.

Stitch Length: Adjust from 0 (basting) to 4 (longest). For most seams, use 2.5.

Stitch Width: Adjust from 0 (straight) to 5 (widest zigzag).

Tension: Dial numbered 0-9. Standard setting is 4-5. Adjust if stitches are loose or puckered.

Presser Feet: Lift lever to change feet. Ensure presser foot is lowered before sewing.

Basic Stitching Guide

Follow these steps for common sewing tasks.

1. Straight Stitch: Select stitch #1. Use for seams, topstitching, and basting.
2. Zigzag Stitch: Select stitch #6. Use for finishing edges, appliqué, and stretch fabrics.
3. 4-Step Buttonhole:
   • Step 1: Select buttonhole stitch #14. Sew left side.
   • Step 2: Select stitch #15. Sew front bar tack.
   • Step 3: Select stitch #16. Sew right side.
   • Step 4: Select stitch #17. Sew rear bar tack.
4. Blind Hem: Select stitch #10. Fold fabric as instructed; stitch catches fold for nearly invisible hem.
5. Decorative Stitches: Select stitches 18-23. Practice on scrap fabric first.

Tip: Always test stitch settings on a scrap of your project fabric before sewing.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Brush lint from bobbin area and feed dogs with the provided brush.
2. Monthly: Remove needle plate screws and clean under the plate. Oil the machine as per manual instructions (use only sewing machine oil).
3. Needle Replacement: Turn handwheel to raise needle. Loosen needle clamp screw, remove old needle, insert new needle with flat side to the back, tighten screw.
4. Exterior: Wipe with a soft, dry cloth. Do not use chemicals or sprays.

CAUTION! Always unplug the machine before cleaning or maintenance. Never immerse in water.

Accessories & Attachments

Standard accessories included:

• All-Purpose Foot (on machine)
• Zipper Foot
• Buttonhole Foot
• Pack of Needles (size 14/90)
• Class 15 Bobbins (4)
• Seam Ripper/Lint Brush
• Soft Dust Cover
• Auxiliary Spool Pin

Optional Accessories: Available for purchase: quilting foot, blind hem foot, gathering foot, edge/joining foot.

Warranty Information

Singer provides a 25-year limited warranty on the machine head and a 5-year limited warranty on electrical components. Proof of purchase is required. This warranty covers defects in materials and workmanship under normal household use. For warranty service, contact Singer Customer Service at 1-800-4-SINGER or visit www.singer.com. Keep your receipt and warranty card in a safe place.

Troubleshooting

Reset: Unplug machine for 2 minutes to reset electronic components (if applicable).

Service: For repairs not covered here, contact Singer Authorized Service Center. 1-800-4-SINGER; www.singer.com