singer sewing machine model 9110 manual

The Singer Sewing Machine Model 9110 is a versatile electronic sewing machine designed for home use. It features a wide range of built-in stitches, automatic needle threading, adjustable stitch length and width, a drop-in bobbin system, and multiple presser feet for various sewing techniques. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, Built-in stitch patterns, Automatic needle threader, Drop-in bobbin system, LED work light, Foot pedal control, Accessory storage compartment.

Unpacking and Setup

Unpack and inspect all contents. Place on a stable, flat surface.

1. Remove machine and accessories from packaging.
2. Attach the foot pedal cord to the machine port.
3. Plug the power cord into the machine and then into a wall outlet.
4. Install the accessory tray and extension table if included.
5. Raise the presser foot lever and install the desired presser foot.

WARNING! Keep hands away from the needle area during setup and operation. Ensure the machine is on a stable surface to prevent tipping.

First-Time Operation

Power on the machine; familiarize yourself with the controls.

1. Thread the machine: Follow the numbered threading path on the machine.
2. Wind the bobbin: Place thread on the spool pin and wind onto an empty bobbin.
3. Insert the bobbin: Place the wound bobbin into the drop-in bobbin case.
4. Select a stitch: Use the stitch selection dial or buttons.
5. Test sew: Use scrap fabric to adjust tension and stitch settings.

CAUTION! Always turn the power off and unplug the machine before changing needles, presser feet, or performing maintenance.

Specifications

• Model: Singer 9110
• Type: Electronic Sewing Machine
• Built-in Stitches: 100+
• Buttonholes: One-step automatic
• Needle Positions: Adjustable
• Stitch Length: Adjustable up to 4mm
• Stitch Width: Adjustable up to 5mm
• Bobbin: Class 15 transparent, top-drop-in
• Lighting: LED
• Power Supply: 110-120V, 60Hz
• Included Accessories: Assorted presser feet, needles, bobbins, seam ripper, brush, screwdriver

Controls and Functions

Access functions via the control panel. Front Panel: Power switch, Stitch selection dial/buttons, Stitch length/width adjusters, Reverse stitch button, Needle up/down button.

Basic Controls: POWER, Stitch Selector, Reverse, Speed Control Slider, Thread Cutter (if equipped).

Stitch Selection: Turn dial or press buttons to select from utility, decorative, or stretch stitches. Adjustments: Use knobs or buttons to modify stitch length and width. Special Functions: Buttonhole lever, automatic needle threader, bobbin winding mode.

Stitch Selection and Settings

Select stitches for different fabrics and projects.

1. Refer to the stitch chart on the machine or manual.
2. Turn the stitch selector to the desired number or icon.
3. For straight stitch, select "0" or the straight stitch icon.
4. For zigzag or decorative stitches, select the corresponding number.
5. Adjust stitch length (short for fine fabrics, long for basting).
6. Adjust stitch width for zigzag and decorative stitches.
7. Use the reverse lever/button to reinforce the beginning and end of seams.

Tip: Always test stitch settings on a scrap of your project fabric first.

Threading and Bobbin Winding

Proper threading is essential for good stitch quality.

1. Raise the presser foot and needle to the highest position.
2. Place the thread spool on the spool pin.
3. Follow the numbered threading guide on the machine.
4. Use the automatic needle threader by pulling down the lever and hooking the thread.
5. To wind the bobbin: Place the thread on the spool pin, guide it through the bobbin winding tension, place empty bobbin on the winder, push to engage, and press the foot pedal.
6. Insert the wound bobbin into the bobbin case with the thread running counterclockwise.

WARNING! Ensure the presser foot is raised when threading the upper thread to allow the thread to seat properly in the tension discs.

Care & Maintenance

Unplug the machine before any cleaning or maintenance.

1. Regularly clean lint and dust from the bobbin area and feed dogs with the provided brush.
2. Oil the machine only as specified in the manual using sewing machine oil.
3. Replace the needle regularly (after every project or 8 hours of sewing).
4. Use a soft, dry cloth to clean the exterior. Do not use harsh chemicals.
5. Store the machine covered when not in use to prevent dust accumulation.

CAUTION! Never immerse the machine in water or spray cleaners directly onto it.

Regulatory Information

This sewing machine complies with applicable safety standards. The Singer name and logo are trademarks of Singer Licensing Company. For support, visit www.singer.com or contact Singer customer service. This product is designed for household use only.

Troubleshooting

Reset: Turn machine off and unplug for 60 seconds to reset electronic controls if they become unresponsive.

Service: For technical support, contact Singer at 1-800-4-SINGER or visit www.singer.com.