singer sewing machine model 5932 manual

The Singer Sewing Machine Model 5932 is a versatile, user-friendly mechanical sewing machine designed for home use. It features a range of built-in stitches, a four-step buttonhole, adjustable stitch length and width, a drop-in bobbin system, and a free arm for sewing cuffs and sleeves. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance.

Features at a Glance

Key components: Main body with free arm, Foot Controller, Power Cord, Accessory Box (including presser feet, bobbins, needles, seam ripper, lint brush, and screwdriver).

Unpacking and Setup

Carefully unpack all components. Place machine on a stable, well-lit table.

1. Remove all packaging materials and plastic covers.
2. Attach the Power Cord to the machine's socket and plug into a standard 120V AC outlet.
3. Connect the Foot Controller to the machine's port.
4. Install the Accessory Box in its designated compartment.
5. Attach the Removable Flat Bed to create a large sewing surface, or remove it to use the free arm.

WARNING! Ensure the machine is switched off and unplugged during setup. Handle with care to avoid injury.

Getting Started

Plug in the machine and turn on the power switch. Follow these initial steps.

1. Winding the Bobbin: Place thread spool on pin, guide thread through bobbin winder tension disc, wind bobbin evenly.
2. Inserting the Bobbin: Drop bobbin into the case under the needle plate, following directional arrows.
3. Threading the Upper Thread: Raise presser foot and needle to highest position. Follow numbered threading path on machine.
4. Drawing Up Bobbin Thread: Hold upper thread tail, turn handwheel toward you to lower and raise needle, pull thread to bring bobbin loop up.
5. Selecting a Presser Foot: Attach appropriate foot (e.g., all-purpose foot) by lowering presser foot lever and snapping foot into place.

CAUTION! Keep fingers away from the needle area during operation. Always turn the handwheel toward you.

Specifications

• Model: Singer 5932
• Type: Mechanical Sewing Machine
• Stitches: Multiple built-in stitches including utility and decorative
• Buttonhole: 4-step manual buttonhole
• Stitch Length: Adjustable up to 4mm
• Stitch Width: Adjustable up to 5mm
• Bobbin: Class 15 transparent, drop-in style
• Needle: Standard domestic sewing machine needle (system 130/705H)
• Power Supply: 120V AC, 60Hz
• Included Accessories: All-purpose foot, zipper foot, buttonhole foot, button sewing foot, seam ripper, needles, bobbins, lint brush, screwdriver, duster

Parts and Controls

Main Controls: Stitch Selector Dial, Stitch Length Dial, Stitch Width Dial, Reverse Stitch Lever, Handwheel, Power Switch, Built-in Light Switch.

Key Areas: Needle Clamp, Presser Foot Lever, Thread Tension Dial, Presser Foot Pressure Dial, Bobbin Winder, Spool Pins, Feed Dogs.

Stitch Selection: Turn the Stitch Selector Dial to the symbol or number for your desired stitch. Adjustments: Use Stitch Length Dial for longer/shorter stitches; use Stitch Width Dial for wider/narrower zigzag or decorative stitches. Tension: Adjust Thread Tension Dial (usually 4-5 for balanced straight stitch). Pressure: Adjust Presser Foot Pressure Dial for lightweight or heavyweight fabrics.

Basic Sewing Operations

Place fabric under presser foot, lower the presser foot lever. Gently press foot controller to start sewing.

1. Straight Stitch: Select straight stitch symbol. Guide fabric gently, letting feed dogs move it.
2. Zigzag Stitch: Select zigzag symbol. Adjust width as needed for finishing edges or sewing stretch fabrics.
3. Reverse Stitching: Hold Reverse Lever to sew backwards for reinforcement.
4. Turning Corners: Stop with needle down in fabric, raise presser foot, pivot fabric, lower presser foot, continue.
5. Removing Fabric: Raise needle to highest position, raise presser foot, pull fabric toward back to release threads, cut threads using built-in thread cutter.

Tip: Practice on scrap fabric first to test stitch settings and tension.

Stitch Selection and Adjustments

Refer to the stitch chart on the machine or manual for specific stitch applications.

1. Blind Hem Stitch: Use blind hem foot. Fold fabric as instructed, select blind hem stitch, guide fold along foot guide.
2. Decorative Stitches: Select decorative stitch number. Use stabilizer underneath lightweight fabrics.
3. Four-Step Buttonhole: Attach buttonhole foot. Mark buttonhole placement. Follow steps 1-4 on dial: 1 (right side), 2 (front bar tack), 3 (left side), 4 (rear bar tack).
4. Button Sewing: Attach button sewing foot. Disengage feed dogs (if possible), set stitch width to match buttonholes, set stitch length to 0.

WARNING! Always use the correct presser foot for the selected stitch. Do not force the handwheel if there is resistance.

Maintenance and Cleaning

Unplug machine before any maintenance. Regular cleaning prevents lint buildup and ensures smooth operation.

1. Remove needle plate screws, lift off needle plate.
2. Use lint brush to clean feed dogs, bobbin area, and hook race.
3. Replace needle plate and secure screws.
4. Wipe exterior with a soft, dry cloth.
5. Oil the machine as per manual instructions using only Singer sewing machine oil (a drop at designated points).
6. Replace needle regularly (after every 8-10 hours of sewing or with each new project).

CAUTION! Do not use compressed air or liquid cleaners. Never oil without unplugging the machine.

Safety Information

Always disconnect power plug from outlet when making adjustments, changing needles, or cleaning. Keep hands away from moving parts. Do not operate with damaged cord or plug. Use machine only for its intended purpose. Keep work area well-lit and clear. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities.

Troubleshooting

For Service: Contact Singer Customer Service or an authorized service center. Do not attempt to repair electrical components yourself.