singer sewing machine model 4452 manual

The Singer Model 4452 is a heavy-duty sewing machine designed for a wide range of fabrics, from delicate silks to heavy denim and leather. It features a powerful motor, a variety of built-in stitches, automatic needle threader, top drop-in bobbin, adjustable presser foot pressure, and a free arm for cylindrical sewing. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Heavy-duty metal frame, built-in stitch patterns, automatic needle threader, top drop-in bobbin system, free arm, adjustable stitch length and width, reverse sewing lever, and built-in LED light.

Unpacking and Setup

Unpack and inspect all contents. Place on a stable, flat surface.

1. Remove machine and accessories from packaging.
2. Attach the power cord to the machine and plug into a 120V AC outlet.
3. Attach the foot pedal to its port and place on the floor.
4. Install the needle (flat side toward the back) and tighten the screw.
5. Wind and insert the bobbin into the top drop-in bobbin case.
6. Thread the upper thread following the numbered path on the machine.

WARNING! Machine is heavy; lift with care using both hands. Ensure the work area is clean and well-lit.

First-Time Operation

Power on the machine using the power switch; the LED light will turn on.

1. Select a straight stitch (pattern 1) using the stitch selection dial.
2. Place a scrap fabric under the presser foot and lower the foot lever.
3. Gently press the foot pedal to start sewing. Practice controlling speed.
4. Use the reverse lever to sew a few stitches backward at the start and end.
5. Raise the presser foot and remove the fabric. Cut threads with the built-in cutter.

CAUTION! Keep fingers away from the needle while sewing. Always turn off and unplug for needle changes or maintenance.

Specifications

• Model: Singer 4452 Heavy Duty.
• Stitches: 32 built-in stitches (6 basic, 7 stretch, 19 decorative).
• Maximum Stitch Length: 4mm.
• Maximum Stitch Width: 5mm.
• Speed: Up to 1,100 stitches per minute.
• Needle: SINGER system 130/705H needles (included).
• Bobbin: Class 15 transparent bobbin.
• Power Supply: 120V AC, 60Hz.
• Warranty: 25-year limited warranty.

Controls and Functions

Access controls on the front and right side of the machine.

Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse sewing lever, bobbin winder spindle.

Right Side: Power switch, power cord socket, foot pedal socket, handwheel.

Needle Area: Presser foot lifter, needle threader, needle clamp screw, LED light, drop-in bobbin cover.

Adjustments: Stitch length (0-4mm), stitch width (0-5mm), presser foot pressure dial (for thick/thin fabrics).

Basic Sewing Guide

Follow these steps for general sewing projects.

1. Select the appropriate stitch for your fabric and project.
2. Thread the machine and insert a wound bobbin.
3. Place fabric under the presser foot, lower the foot, and hold thread tails.
4. Press the foot pedal to sew, guiding fabric gently with your hands.
5. Use the reverse lever at the start and end to lock stitches.
6. Raise the presser foot and pull fabric to the back to cut threads.

Tip: Always test stitches on a fabric scrap before starting your project.

Stitch Selection and Applications

Consult the stitch chart on the machine or manual for pattern numbers.

Note: Adjust stitch length and width for different effects and fabric weights.

Maintenance and Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Unplug the machine before any maintenance.
2. Remove the needle plate screws and clean lint from feed dogs and bobbin area with the provided brush.
3. Oil the machine as per manual instructions using only SINGER sewing machine oil.
4. Wipe the exterior with a soft, dry cloth. Do not use chemicals or abrasives.
5. Replace the needle regularly (after 8-10 hours of sewing or for a new project).

CAUTION! Never immerse the machine in water. Avoid oiling plastic parts.

Accessories

The following accessories are included with the Singer 4452:

• All-Purpose Foot (on machine)
• Zipper Foot
• Buttonhole Foot
• Button Sewing Foot
• Quilting Guide
• Pack of Needles (size 14/90)
• Class 15 Bobbins (4)
• Seam Ripper/Lint Brush
• Screwdriver
• Foot Pedal & Power Cord

Additional accessories are available for purchase from authorized dealers.

Safety Information

Read all instructions before use. Keep away from children.

• Always unplug the machine when not in use, during needle changes, and when cleaning.
• Do not operate with damaged cord or plug.
• Use only SINGER recommended needles, bobbins, and accessories.
• Do not sew over pins; remove them as you sew.
• Never pull or push fabric forcefully; let the feed dogs move the fabric.
• Ensure adequate lighting in your work area.

WARNING! Risk of electric shock. Do not expose to rain or moisture.

Troubleshooting

Service: For persistent issues, contact Singer Customer Service at 1-800-4-SINGER or visit www.singer.com.