singer sewing machine model 4432 manual

The Singer Model 4432 is a heavy-duty mechanical sewing machine designed for versatility and durability. It features a powerful motor, multiple built-in stitches, automatic needle threader, adjustable presser foot pressure, and a top drop-in bobbin system. Suitable for sewing a wide range of fabrics from lightweight to heavy materials like denim and leather. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Heavy-duty metal frame, built-in stitch patterns, automatic needle threader, adjustable stitch length and width, top drop-in bobbin, free arm capability, included accessory kit.

Unpacking and Setup

Unpack all components carefully. Place machine on stable, flat surface.

1. Remove machine from box: Lift by carrying handle, not by head.
2. Attach extension table: Slide onto free arm until it clicks into place.
3. Install foot controller: Plug into machine port, then into power outlet.
4. Connect power: Plug power cord into machine, then into wall outlet.
5. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten.

WARNING! Machine is heavy; use proper lifting technique. Ensure all connections are secure before powering on.

First-Time Operation

Power on machine; familiarize yourself with controls before sewing.

1. Wind bobbin: Place thread on spool pin, guide through tension disc, wind onto bobbin.
2. Insert bobbin: Drop bobbin into case with thread unwinding counterclockwise.
3. Thread upper thread: Follow numbered threading path on machine.
4. Use needle threader: Push lever down to automatically thread needle.
5. Pull up bobbin thread: Hold upper thread, turn handwheel toward you to bring up bobbin thread.
6. Select stitch: Turn stitch selection dial to desired pattern.
7. Begin sewing: Place fabric under presser foot, lower foot, press foot controller gently.

CAUTION! Keep fingers away from needle area during operation. Always turn handwheel toward you.

Specifications

• Model: Singer 4432 Heavy Duty
• Stitches: 32 built-in stitches
• Motor: 1.0 amp heavy-duty motor
• Maximum Stitch Length: 4mm
• Maximum Stitch Width: 5mm
• Buttonholes: One-step automatic
• Needle Positions: Adjustable (left, center, right)
• Bobbin: Class 15 transparent top drop-in
• Presser Feet: 4 included (all-purpose, zipper, buttonhole, button sewing)
• Power Source: 110V, 60Hz (US/Canada)
• Weight: 14.5 lbs (6.6 kg)
• Warranty: 25-year limited warranty

Controls and Functions

Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch button, bobbin winder, spool pins.

Right Side: Handwheel, power switch, power cord port, foot controller port.

Needle Area: Needle clamp screw, presser foot lifter, needle threader lever, feed dogs, bobbin cover.

Stitch Selection: Turn dial to select from 32 stitches (numbered 1-32). Stitch Length: 0-4mm adjustment. Stitch Width: 0-5mm adjustment (for zigzag and decorative stitches). Reverse: Hold button while sewing to reinforce. Tension: Dial on front for upper thread tension (3-4 for normal sewing).

Stitch Selection and Settings

Refer to stitch chart on machine for recommended settings.

1. Straight Stitch (1-3): For basic sewing, use stitch length 2.0-2.5mm.
2. Zigzag Stitch (4-6): For finishing edges, use width 3-4mm, length 1.5-2.0mm.
3. Stretch Stitches (7-12): For knits and elastic fabrics.
4. Decorative Stitches (13-30): For embellishments, adjust width and length as desired.
5. Buttonhole (31): One-step automatic - follow markings on presser foot.
6. Blind Hem (32): For nearly invisible hems on garments.

Tip: Always test stitch on fabric scrap before sewing project. Adjust tension if needed.

Threading and Bobbin Winding

Proper threading is essential for good stitch quality.

1. Bobbin Winding: Place thread on vertical spool pin, guide through first thread guide, around tension discs, through bobbin winding tension spring. Place bobbin on winder, push to right. Hold thread end, press foot controller. Stop when bobbin is 80% full.
2. Upper Threading: Follow numbered path: 1) Spool pin, 2) First thread guide, 3) Tension discs, 4) Take-up lever, 5) Second thread guide, 6) Needle threader or needle eye.
3. Needle Threader: Lower presser foot, raise needle to highest position. Push threader lever down, hook catches needle eye. Pull thread through hook, release lever, pull thread through needle.
4. Bobbin Insertion: Open bobbin cover. Hold bobbin with thread unwinding counterclockwise. Drop into bobbin case. Pull thread through slot, under tension spring. Close cover.

WARNING! Always thread with presser foot raised and needle at highest position.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Brush lint from bobbin area and feed dogs.
2. Weekly: Remove needle plate to clean underneath.
3. Monthly: Oil machine per instructions in manual (2-3 drops in designated spots).
4. Needle Replacement: Replace needle after 8 hours of sewing or for each new project.
5. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance. Use only Singer recommended oil.

Accessories

Standard accessories included with Model 4432:

• All-purpose foot
• Zipper foot
• Buttonhole foot
• Button sewing foot
• Class 15 bobbins (4)
• Needles (assorted sizes)
• Seam ripper/lint brush
• Screwdriver
• Spool pin felt
• Quilting guide
• Instruction manual

Optional accessories available: Walking foot, roller foot, blind hem foot, quilting foot, extension table.

Safety Information

Important safety precautions for operation:

1. Always unplug machine when not in use, during threading, needle changes, or cleaning.
2. Keep fingers away from moving parts, especially needle area.
3. Do not sew over pins - remove them before they reach the needle.
4. Use proper needle for fabric type (universal, denim, stretch, etc.).
5. Ensure adequate lighting in work area.
6. Do not use damaged or bent needles.
7. Keep machine on stable surface during operation.
8. Do not operate if cord or foot controller is damaged.

For children: This is not a toy. Supervise children if they are learning to sew.

Troubleshooting

Reset: Unplug machine for 5 minutes if experiencing electronic issues.

Service: For technical support: 1-800-4-SINGER (1-800-474-6437) or visit www.singer.com