singer sewing machine model 2932 manual

The Singer Sewing Machine Model 2932 is a versatile mechanical sewing machine designed for home use, featuring a built-in stitch selection, automatic needle threader, adjustable stitch length and width, free arm capability, drop-in bobbin system, and multiple presser feet for various sewing techniques. Powered by a foot pedal with speed control, it operates on standard household voltage. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection and Adjustment 8. Maintenance and Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Mechanical sewing head, built-in stitch patterns, free arm, accessory compartment, foot pedal, power cord, and presser feet set.

FeatureDescription
Built-in Stitch SelectionDial for selecting straight, zigzag, decorative, and buttonhole stitches
Automatic Needle ThreaderAssists in threading the needle easily
Adjustable Stitch Length/WidthControl dials for customizing stitch size
Free ArmRemovable extension table for sewing cylindrical items like sleeves
Drop-in Bobbin SystemTop-loading bobbin with clear cover for easy monitoring
Presser Feet IncludedAll-purpose, zipper, buttonhole, and button sewing feet
Foot Pedal with Speed ControlVariable speed control via foot pedal
Built-in LightLED light illuminates sewing area
Reverse Stitch LeverFor reinforcing stitches at beginning and end of seams
Accessory StorageCompartment in free arm for storing accessories

Unpacking and Setup

Unpack and inspect contents. Place on stable, flat surface.

  1. Remove machine and accessories from packaging.
  2. Attach power cord to machine and plug into grounded outlet.
  3. Attach foot pedal to machine and place on floor.
  4. Install needle: Loosen needle clamp screw, insert needle with flat side to back, tighten screw.
  5. Wind bobbin: Place thread on spool pin, guide through tension disc, wind onto bobbin using bobbin winder.
  6. Insert bobbin: Place bobbin into bobbin case with thread running counterclockwise, pull thread through slot.

WARNING! Keep fingers away from needle area during setup and operation. Ensure machine is unplugged during needle installation.

First-Time Operation

Plug in machine and turn on power switch (if applicable).

  1. Thread machine: Follow threading guide printed on machine; use automatic needle threader if available.
  2. Pull up bobbin thread: Hold top thread, turn handwheel toward you to lower and raise needle, pull both threads under presser foot.
  3. Select stitch: Turn stitch selection dial to desired pattern (e.g., straight stitch).
  4. Adjust stitch length/width: Set dials as needed for fabric.
  5. Place fabric under presser foot, lower presser foot lever.
  6. Start sewing: Gently press foot pedal to begin; guide fabric with hands.
  7. Reverse stitching: Press reverse lever at start and end of seam for reinforcement.

CAUTION! Always lower presser foot before sewing. Do not pull fabric; let feed dogs move it.

Specifications

Controls and Settings

Access controls via dials and levers on machine body.

Stitch Selection Dial: Turn to select stitch pattern (icons indicate stitch type). Stitch Length Dial: Adjusts length (higher number = longer stitch). Stitch Width Dial: Adjusts width for zigzag and decorative stitches. Reverse Stitch Lever: Hold down for reverse sewing. Presser Foot Lever: Raises and lowers presser foot. Handwheel: Manual control of needle position (turn toward you). Bobbin Winder: Engages to wind bobbin. Power Switch: Turns machine on/off (if equipped).

Stitch Selection and Adjustment

Use stitch selection dial to choose pattern; adjust length/width as needed.

  1. Straight Stitch: For seams, topstitching; set length 2-3mm, width 0mm.
  2. Zigzag Stitch: For finishing edges, stretch fabrics; set width 2-5mm.
  3. Decorative Stitches: For embellishments; refer to stitch guide for settings.
  4. Buttonhole Stitch: Use 4-step buttonhole; follow markings on foot.
  5. Button Sewing: Use button sewing foot; set stitch width to match buttonholes.

Tip: Test stitches on scrap fabric before sewing project.

Maintenance and Cleaning

Unplug machine before maintenance. Clean lint and dust regularly.

  1. Remove needle plate: Use screwdriver to loosen screws, lift plate.
  2. Clean feed dogs and bobbin area: Use small brush to remove lint.
  3. Oil machine: Apply 1-2 drops of sewing machine oil to moving parts as per manual (if required).
  4. Replace needle: Change needle after every 8-10 hours of sewing or if damaged.
  5. Store properly: Cover machine when not in use; keep in dry place.

CAUTION! Do not use compressed air; it can force lint into mechanism. Use only sewing machine oil.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Singer Manufacturing Company; trademarks of Singer. For support, visit www.singer.com or contact 1-800-4-SINGER. Machine complies with safety standards UL 60335-2-28.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine not runningPower issueCheck power cord connection; ensure outlet works; check power switch.
Thread bunching underneathIncorrect threading/bobbinRe-thread top and bobbin; ensure bobbin inserted correctly.
Needle breakingWrong needle/bent needleReplace needle; ensure correct type for fabric; do not pull fabric.
Skipped stitchesDull needle/thread tensionReplace needle; adjust thread tension; re-thread.
Uneven stitchesThread tensionAdjust tension dial; clean tension discs.
Noise/vibrationLint/dust in mechanismClean bobbin area and feed dogs; ensure machine on stable surface.
Buttonhole not formingIncorrect settings/footUse buttonhole foot; follow 4-step process; test on scrap fabric.

Reset: Unplug machine for 5 minutes if electronic issues occur.

Service: 1-800-4-SINGER; www.singer.com

Singer Sewing Machine Model 2932 Manual © - All Rights Reserved 2025