singer sewing machine model 2277 manual

The Singer Model 2277 is a versatile, user-friendly mechanical sewing machine designed for home use. It features a built-in stitch selection dial, adjustable stitch length and width, a four-step buttonhole function, a drop-in bobbin system, and a free arm for sewing cuffs and sleeves. It is powered by a foot pedal and operates on standard household current. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Mechanical sewing head, Stitch Selection Dial, Stitch Length/Width Adjusters, Reverse Stitch Lever, Bobbin Winder, Free Arm, Foot Pedal, and Accessory Kit.

Unpacking and Setup

Carefully unpack all components. Place machine on a stable, well-lit table.

1. Remove protective packaging and foam from needle area and bobbin case.
2. Attach Foot Pedal: Plug the pedal cord into the designated port on the right side of the machine.
3. Connect Power: Plug the power cord into the machine and then into a standard 120V AC wall outlet.
4. Install Accessory Tray: Slide the removable accessory tray onto the free arm until it clicks into place.
5. Install Needle and Thread: Refer to First-Time Operation section.

WARNING! Keep fingers away from the needle area during setup and operation. Ensure the machine is unplugged during initial assembly.

First-Time Operation

Power on the machine using the switch; the work light should illuminate.

1. Winding the Bobbin: Place thread spool on pin, guide thread through bobbin winder tension disc, place empty bobbin on winder shaft, push shaft to the right, and press foot pedal.
2. Inserting the Bobbin: Open the bobbin cover, drop in the filled bobbin with thread unwinding counter-clockwise, pull thread into the slot and under the tension spring.
3. Threading the Upper Thread: Raise presser foot. Follow numbered guide on machine from spool pin, through tension discs, take-up lever, and down to the needle. Thread needle from front to back.
4. Drawing Up Bobbin Thread: Hold upper thread tail, turn handwheel toward you to lower and raise needle, pull upper thread to bring bobbin thread up through needle plate.
5. Select Stitch: Turn the Stitch Selection Dial to your desired pattern (e.g., straight stitch).
6. Begin Sewing: Place fabric under presser foot, lower presser foot lever, and gently press foot pedal.

CAUTION! Always turn the handwheel toward you (counter-clockwise) only. Never force it.

Specifications

• Model: Singer 2277
• Type: Mechanical, Free-Arm Sewing Machine
• Built-in Stitches: Multiple (Straight, Zigzag, Blind Hem, Decorative)
• Buttonhole: 4-Step Manual
• Stitch Length: Adjustable (0-4 mm)
• Stitch Width: Adjustable (0-5 mm)
• Bobbin: Class 15, Drop-in Style
• Needle: Standard Household 15x1 (HAx1)
• Power Supply: 120V AC, 60Hz
• Included Feet: All-Purpose, Zipper, Buttonhole, Button Sewing

Controls and Functions

Main Controls: Stitch Selection Dial, Stitch Length Dial, Stitch Width Dial, Reverse Stitch Lever, Handwheel, Presser Foot Lifter, Bobbin Winder.

Stitch Selection Dial: Turn to select stitch symbol. Align with mark on machine body.

Stitch Length Dial: Higher numbers for longer stitches (basting), lower for shorter (fine fabrics).

Stitch Width Dial: Controls zigzag width. Set to '0' for straight stitch.

Reverse Stitch Lever: Hold down to sew in reverse for reinforcement.

Presser Foot Pressure: Adjustable via dial on top of machine (for specialized fabrics).

Basic Stitching Guide

Straight Stitch: Default for seams. Zigzag: For finishing edges and stretch fabrics.

1. Select the correct presser foot for your task (e.g., All-Purpose foot).
2. Set Stitch Length (2.5 is standard for medium-weight fabric).
3. For zigzag, set desired Width.
4. Place fabric edges aligned with seam guide on needle plate.
5. Lower presser foot and begin sewing. Guide fabric gently; do not push or pull.
6. Use Reverse Lever at start and end of seam to lock stitches.

Tip: Practice on scrap fabric first to test tension and stitch appearance.

Advanced Functions

Four-Step Buttonhole:

1. Attach Buttonhole Foot. Mark buttonhole placement on fabric.
2. Step 1 (Right Side): Set dial to Zigzag (Width 5, Length 0.5). Sew down right side to desired length.
3. Step 2 (Bar Tack): Turn dial to next setting. Sew a few stitches to form bottom bar.
4. Step 3 (Left Side): Turn dial to next setting. Sew back up left side.
5. Step 4 (Bar Tack): Turn to final setting. Sew a few stitches to form top bar.
6. Cut buttonhole open with a seam ripper, using the cutting guide on the foot.

Blind Hem Stitch: Use Blind Hem Foot. Fold fabric as per manual guide. Select blind hem stitch. Stitch so needle just catches the folded edge.

Maintenance & Cleaning

Unplug machine before any maintenance.

1. Cleaning Lint: Remove needle plate screws, lift plate. Use small brush to remove lint from feed dogs and bobbin area. Reassemble.
2. Oiling: Apply 1-2 drops of sewing machine oil to points indicated in manual (e.g., hook race) after every 8-10 hours of use. Wipe excess oil.
3. Needle Replacement: Turn handwheel to raise needle to highest position. Loosen needle clamp screw, remove old needle. Insert new needle with flat side to the back, tighten screw.

CAUTION! Use only sewing machine oil. Do not use household oils. Keep machine covered when not in use.

Regulatory Information

This appliance complies with relevant safety standards. The Singer trademark and model names are used under license from Singer Licensing B.V. For support, visit www.singer.com or contact customer service at 1-800-4-SINGER.

Troubleshooting

Reset: Unplug machine for 5 minutes to reset internal components if experiencing electrical issues.

Service: For repairs, contact an authorized Singer service center.