Singer Sewing Machine M3220 Manual

The Singer M3220 is a versatile mechanical sewing machine designed for home use, featuring 32 built-in stitches, a 4-step buttonhole, adjustable stitch length and width, free arm capability, built-in needle threader, top drop-in bobbin system, and multiple presser feet. It operates on 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sewing machine head, foot pedal, power cord, accessory kit, instruction manual.

Unpacking and Setup

Unpack and inspect contents. Place on stable surface.

1. Remove machine from box and all packaging materials.
2. Attach foot pedal: Plug into machine port.
3. Connect power: Plug power cord into machine and wall outlet.
4. Install needle: Loosen needle clamp, insert needle with flat side to back, tighten.
5. Wind bobbin: Follow bobbin winding instructions.

WARNING! Keep fingers away from needle area during operation. Ensure machine is unplugged during setup.

First-Time Use

Power on machine; follow basic threading steps.

1. Thread upper thread: Follow numbered path on machine; use built-in threader.
2. Insert bobbin: Place bobbin in case with thread unwinding counterclockwise.
3. Bring up bobbin thread: Hold upper thread, turn handwheel toward you.
4. Select stitch: Turn stitch selector dial.
5. Adjust settings: Set stitch length and width as needed.
6. Begin sewing: Place fabric, lower presser foot, press foot pedal.

CAUTION! Always lower presser foot before sewing. Do not force fabric; let feed dogs move it.

Specifications

• Model: Singer M3220 Mechanical Sewing Machine.
• Stitches: 32 built-in stitches.
• Buttonhole: 4-step manual buttonhole.
• Stitch Length: Adjustable up to 4mm.
• Stitch Width: Adjustable up to 5mm.
• Bobbin: Class 15 transparent top drop-in.
• Needle: Standard domestic needle system 130/705H.
• Presser Feet: 4 included (all-purpose, zipper, buttonhole, button sewing).
• Power Source: 120V AC, 60Hz.
• Warranty: 25-year limited warranty.

Controls and Settings

Access controls via dials and buttons on front panel.

Stitch Selector Dial: Turn to choose stitch pattern (1-32). Stitch Length Dial: Adjust from 0-4 (0 for bobbin winding). Stitch Width Dial: Adjust from 0-5mm for zigzag and decorative stitches. Reverse Stitch Button: Hold to sew backwards. Power Switch: On/off with light. Handwheel: Manual control of needle position.

Settings: Thread tension dial (4-6 for normal sewing), presser foot pressure (adjustable for fabric types).

Stitch Selection

Select stitches using dial; refer to stitch chart.

1. Straight Stitch (1): For seams, topstitching; adjust length.
2. Zigzag Stitch (2-6): For finishing edges, appliqué; adjust width.
3. Decorative Stitches (7-24): For embellishments; use stabilizer.
4. Stretch Stitches (25-32): For knits and elastic fabrics.
5. Buttonhole (B): 4-step process; use buttonhole foot.

Tip: Test stitch on fabric scrap before starting project.

Basic Sewing Techniques

Follow steps for common tasks.

1. Seams: Use straight stitch; backstitch at beginning and end.
2. Zippers: Use zipper foot; baste zipper first.
3. Buttonholes: Mark placement, use buttonhole foot, follow 4 steps.
4. Buttons: Use button sewing foot; set stitch width to match buttonholes.
5. Hemming: Fold hem, use blind hem stitch or straight stitch.
6. Free Arm: Remove flatbed for sewing sleeves and cuffs.

WARNING! Keep fingers clear of moving needle. Turn handwheel toward you only.

Maintenance & Cleaning

Unplug before maintenance. Clean lint regularly.

1. Remove needle plate: Use screwdriver to access bobbin area.
2. Clean lint: Use brush to remove lint from feed dogs and bobbin case.
3. Oil machine: Apply drop of sewing machine oil to moving parts as manual directs.
4. Replace needle: Change needle after 8 hours of sewing or if damaged.
5. Store properly: Cover machine when not in use.

CAUTION! Do not use compressed air; it can force lint deeper. Use only sewing machine oil.

Accessories

Included accessories: All-purpose foot, zipper foot, buttonhole foot, button sewing foot, needles, bobbins, screwdriver, lint brush, seam ripper, spool pin felt.

Optional: Additional presser feet available for quilting, blind hem, etc.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Singer Manufacturing Company; trademarks of Singer. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Reset: Unplug for 30 seconds if electronic issues occur.

Service: 1-800-4-SINGER; www.singer.com