Singer Sewing Machine C7290Q User Manual

The Singer C7290Q is a versatile computerized sewing machine featuring 100 built-in stitches, automatic needle threader, top drop-in bobbin, adjustable stitch length and width, automatic tension control, built-in buttonhole styles, free arm capability, and LED lighting. Powered by standard household current. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Computerized control panel, Automatic needle threader, Drop-in bobbin system, Free arm, LED work light, Foot pedal, Power cord.

Unpacking and Setup

Unpack all contents carefully. Place on a stable, flat surface.

1. Remove machine from box and place on table.
2. Attach power cord to machine and plug into wall outlet.
3. Install foot pedal and connect to machine.
4. Raise presser foot lever and install needle (flat side to back).
5. Wind bobbin and insert into bobbin case.
6. Thread upper thread following numbered path on machine.

WARNING! Keep fingers away from needle area during setup and operation. Ensure machine is unplugged when threading needle or changing accessories.

First-Time Operation

Plug in machine and turn power switch to ON.

1. Select straight stitch using stitch selector dial.
2. Place fabric under presser foot, lower presser foot lever.
3. Gently press foot pedal to start sewing.
4. Practice on scrap fabric to adjust speed and tension.
5. Use reverse stitch button to secure beginning and end of seam.

CAUTION! Always start with needle at highest position. Never pull fabric while needle is in fabric.

Specifications

• Model: Singer C7290Q
• Stitches: 100 built-in stitches
• Buttonholes: One-step automatic
• Needle Threader: Automatic
• Bobbin: Top drop-in, Class 15 transparent
• Stitch Length: Adjustable up to 4mm
• Stitch Width: Adjustable up to 5mm
• Lighting: LED
• Power Supply: 110V, 60Hz (or local equivalent)
• Included Feet: All-purpose foot, buttonhole foot, zipper foot

Controls and Functions

Control Panel: Stitch selection dial, Stitch length adjustment, Stitch width adjustment, Reverse stitch button, Needle up/down button.

Machine Body: Power switch, Handwheel, Presser foot lever, Thread tension dial, Bobbin winder spindle.

Stitch Selection: Turn dial to choose stitch pattern (numbers correspond to stitch chart). Stitch Adjustment: Use +/- buttons or dials to modify length and width. Special Functions: Automatic needle threader (lever on side), Bobbin winding (push bobbin to right), Free arm conversion (remove accessory tray).

Stitch Selection and Settings

Refer to stitch chart for pattern numbers and recommended uses.

1. Turn machine OFF before changing stitch selection.
2. Select stitch number using dial or buttons.
3. Adjust stitch length: Higher number = longer stitch.
4. Adjust stitch width: Higher number = wider stitch (for zigzag and decorative stitches).
5. Test stitch on scrap fabric before sewing project.

Tip: For stretch fabrics, use stretch stitches (indicated on chart). For buttonholes, use automatic buttonhole foot and follow step-by-step guide.

Basic Sewing Techniques

Follow these steps for common sewing tasks.

1. Straight Stitch: Use for seams, topstitching. Set length 2.0-2.5.
2. Zigzag Stitch: Use for finishing edges, appliqué. Adjust width as needed.
3. Buttonhole: Attach buttonhole foot, select buttonhole stitch, follow automatic sequence.
4. Zipper Installation: Use zipper foot for close stitching next to zipper teeth.
5. Blind Hem: Use blind hem foot and stitch for nearly invisible hems.
6. Decorative Stitches: Select pattern, stabilize fabric with interfacing if needed.

WARNING! Always use correct presser foot for technique. Keep fingers away from moving needle.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Unplug machine before cleaning.
2. Remove needle plate screws and clean lint from feed dogs and bobbin area.
3. Use small brush (included) to remove dust and thread bits.
4. Oil moving parts as per manual instructions (use sewing machine oil only).
5. Wipe exterior with soft, dry cloth.

CAUTION! Do not use compressed air as it can force lint into mechanism. Never immerse machine in water.

Accessories

Standard accessories included:

• All-purpose foot
• Buttonhole foot
• Zipper foot
• Button sewing foot
• Seam ripper/lint brush
• Needles (assorted sizes)
• Bobbin (4 extra)
• Spool caps
• Screwdriver

Optional: Additional presser feet available for specialized techniques (walking foot, quilting foot, etc.)

Safety Information

Read all instructions before use. Keep manual for reference.

• Always unplug machine when not in use, before changing needles, or cleaning.
• Do not operate with damaged cord or plug.
• Keep fingers, hair, and loose clothing away from moving parts.
• Use only Singer recommended accessories and parts.
• Do not use outdoors or in damp locations.
• This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities.

For support, visit www.singer.com or contact Singer customer service.

Troubleshooting

Reset: Turn machine OFF, wait 30 seconds, then turn ON again.

Service: For technical issues, contact authorized Singer service center. Do not attempt to repair electrical components yourself.