Singer Sewing Machine 9960 Manual

The Singer Sewing Machine 9960 is a computerized sewing machine featuring 600 built-in stitches, automatic needle threader, drop-in bobbin system, adjustable sewing speed, automatic tension control, LCD touch screen, built-in needle plate thread cutter, free arm capability, and a wide range of presser feet. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Stitch Selection and Settings 8. Maintenance and Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Computerized control panel, Automatic needle threader, Drop-in bobbin system, Free arm, Accessory storage, Foot pedal, Power cord.

Feature	Description
Built-in Stitches	600 stitches including utility, decorative, and alphabets
Automatic Needle Threader	Threads needle with ease at push of lever
Drop-in Bobbin	Top-loading, jam-resistant bobbin system with clear cover
LCD Touch Screen	For stitch selection and settings display
Adjustable Sewing Speed	Control via slider or foot pedal
Automatic Thread Cutter	Built-in cutter on needle plate
Free Arm	Removable extension table for cylindrical sewing
Presser Feet Included	All-purpose foot, zipper foot, buttonhole foot, etc.
Automatic Tension	Computer-controlled for consistent stitch quality
Needle Up/Down	Programmable needle stop position

Unpacking and Setup

Unpack and inspect all contents. Place on stable, flat surface.

Remove machine from box: Lift by carrying handle, not by free arm.
Attach power cord: Plug into machine rear, then into 120V outlet.
Install foot pedal: Connect to machine port, place on floor.
Attach extension table: Slide onto free arm until it clicks.
Wind and insert bobbin: Follow bobbin winding instructions.
Thread machine: Use automatic needle threader as shown in diagram.

WARNING! Keep fingers away from needle area during operation. Ensure proper ventilation.

First-Time Operation

Power on machine; follow on-screen prompts.

Select language: On LCD screen, choose ENGLISH (default).
Test stitches: Thread machine with scrap fabric; select basic straight stitch.
Adjust stitch length/width: Use +/- buttons on control panel.
Practice speed control: Use foot pedal or speed slider.
Explore stitch categories: Use category buttons to browse stitches.

CAUTION! Always turn off and unplug machine before changing needle or performing maintenance.

Specifications

Model: Singer 9960 Quantum Stylist
Stitches: 600 built-in stitches
Stitch Width: Up to 7mm
Stitch Length: Up to 5mm
Speed: Up to 850 stitches per minute
Needle System: HAx1 (Singer 2020)
Bobbin: Class 15 transparent
Presser Feet: 13 included
Display: LCD touch screen with stitch preview
Power Supply: 120V AC, 60Hz
Dimensions: 19.3" x 8.3" x 15.4"
Weight: 22.5 lbs

Controls and Functions

Access functions via LCD touch screen and physical buttons.

Control Panel: Power button, Stitch category buttons, Stitch selection dial, LCD touch screen, Speed control slider, Reverse button, Needle up/down button, Automatic thread cutter button.

Stitch Settings: Length (0-5mm), Width (0-7mm), Mirror image, Twin needle mode, Memory function for custom combinations.

Special Functions: Automatic buttonhole (one-step), Alphabet stitching, Decorative stitch combinations, My Custom Stitch™ creator.

Stitch Selection and Settings

Select from 600 built-in stitches including utility, decorative, quilting, and alphabets.

Choose stitch category: Press corresponding category button (Utility, Decorative, etc.).
Select specific stitch: Turn selection dial or touch LCD screen.
Adjust settings: Use +/- buttons for length and width.
Save combinations: Use memory function to save up to 50 stitch combinations.
Automatic buttonhole: Select buttonhole stitch, follow on-screen prompts.
Alphabet stitching: Choose letter mode, select characters via dial.

Tip: Always test stitch on scrap fabric before starting project.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

Daily: Brush lint from bobbin area and feed dogs.
Weekly: Oil hook race and bobbin area (use Singer oil only).
Monthly: Clean under needle plate; check belt tension.
As needed: Replace needle after 8-10 hours of sewing.

Cleaning: Unplug machine first. Use soft brush for lint; damp cloth for exterior. Never immerse in water.

CAUTION! Use only Singer recommended needles and bobbins. Improper accessories may damage machine.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. UL listed for safety. Copyright © Singer Manufacturing Company. All trademarks owned by Singer or its affiliates. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't power on	Power connection	Check power cord connections; ensure outlet works.
Needle breaks	Wrong needle/thread tension	Replace with correct needle; check threading; adjust tension.
Thread bunching underneath	Incorrect bobbin threading	Re-thread bobbin; ensure bobbin inserted correctly.
Uneven stitches	Dirty feed dogs/wrong tension	Clean feed dogs; adjust upper tension.
LCD screen blank	Power issue	Check power supply; restart machine.
Automatic threader not working	Needle not in highest position	Raise needle to highest position; ensure thread in hook.
Machine skipping stitches	Bent needle/wrong needle type	Replace needle; use correct needle for fabric.
Unusual noise	Lint buildup/loose parts	Clean bobbin area; check for loose screws.

Reset: Turn off machine, unplug for 60 seconds, then restart.

Service: 1-800-4-SINGER; www.singer.com for authorized service centers.