singer sewing machine 4432 manual

The Singer 4432 is a heavy-duty sewing machine designed for versatility and durability. It features a powerful motor, a variety of built-in stitches, an automatic needle threader, a top drop-in bobbin, and a heavy-duty metal frame. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Heavy-duty metal frame, built-in stitch panel, automatic needle threader, top drop-in bobbin system, free arm, accessory storage.

Installation & Setup

Unpack and inspect contents. Place on stable surface.

1. Remove machine from packaging and all protective materials.
2. Place machine on a sturdy, flat table or sewing cabinet.
3. Connect foot control pedal to machine and plug power cord into outlet.
4. Install needle: Loosen needle clamp screw, insert needle with flat side to the back, tighten screw.
5. Wind bobbin: Place empty bobbin on winder, thread through guides, engage bobbin winder.

WARNING! Keep fingers away from needle area during operation. Unplug machine when not in use or when performing maintenance.

First-Time Operation

Power on machine; follow threading guide.

1. Thread upper thread: Follow numbered guides from spool pin to needle.
2. Use automatic needle threader: Lower lever to thread needle automatically.
3. Insert bobbin: Place wound bobbin in bobbin case with thread pulling counterclockwise.
4. Bring up bobbin thread: Hold upper thread, turn handwheel toward you to bring up bobbin thread.
5. Select stitch: Turn stitch selection dial to desired pattern.
6. Test sew on scrap fabric to adjust tension and stitch settings.

CAUTION! Always start with needle at highest position. Keep hands clear of moving parts.

Specifications

• Model: Singer 4432 Heavy Duty
• Stitches: 32 built-in stitches
• Stitch Length: Adjustable up to 6mm
• Stitch Width: Adjustable up to 6mm
• Speed: Up to 1,100 stitches per minute
• Needle Positions: Left, center, right
• Presser Feet: Includes all-purpose, zipper, buttonhole, button sewing feet
• Bobbin: Class 15 transparent bobbin
• Power Source: 120V AC, 60Hz
• Warranty: 25-year limited warranty

Controls and Settings

Access controls via front panel dials and levers.

Front Panel: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch lever, bobbin winder, thread tension dial.

Stitch Selection: Turn dial to select from 32 stitches. Stitch Length: Adjust for shorter/longer stitches (0-4). Stitch Width: Adjust for narrower/wider stitches (0-6). Thread Tension: Adjust for balanced stitches (usually 4-5). Presser Foot Pressure: Adjust lever for thick/thin fabrics. Reverse Stitch: Hold lever for backward sewing.

Stitch Selection & Adjustments

Select from 32 stitches including straight, zigzag, stretch, and decorative.

1. Turn stitch selection dial to desired pattern number.
2. Adjust stitch length: Higher numbers for longer stitches.
3. Adjust stitch width: Higher numbers for wider zigzag or decorative stitches.
4. For buttonholes: Use one-step buttonhole foot and follow marked guide.
5. For stretch fabrics: Use stretch stitches (patterns 10-15).
6. For decorative sewing: Use decorative stitches (patterns 20-32).

Tip: Always test stitch settings on scrap fabric before sewing your project.

Threading & Bobbin Winding

Proper threading is essential for smooth operation.

1. Upper threading: Place spool on pin, follow numbered guides, use needle threader.
2. Bobbin winding: Place empty bobbin on winder, thread through guides, push bobbin winder to engage, press foot control.
3. Bobbin insertion: Open bobbin cover, drop in bobbin with thread pulling counterclockwise, pull thread through slot.
4. Bring up bobbin thread: Hold upper thread, turn handwheel toward you until bobbin thread appears.
5. Pull both threads under presser foot and toward back of machine.

WARNING! Ensure machine is off when threading. Keep threads free of tangles.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Unplug machine before cleaning.
2. Remove needle plate screws and clean lint from feed dogs and bobbin area.
3. Use small brush to remove dust and lint from tension discs and thread guides.
4. Oil moving parts as indicated in manual (use only Singer sewing machine oil).
5. Replace needle regularly (after 8-10 hours of sewing).

CAUTION! Do not use compressed air as it can force lint deeper into machine. Never oil plastic parts.

Regulatory Information

UL Listed: Complies with safety standards. FCC Part 15: Class B digital device. Copyright © Singer Manufacturing Company. All trademarks are property of Singer. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Reset: Unplug machine for 5 minutes to reset electronic components.

Service: 1-800-4-SINGER; www.singer.com