Singer Sewing Machine 3314C Manual

The Singer 3314C is a versatile, heavy-duty sewing machine designed for home use, featuring a powerful motor, multiple built-in stitches, automatic needle threader, adjustable stitch length and width, free arm capability, and easy-to-use controls. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Heavy-duty metal frame, built-in stitch patterns, automatic needle threader, free arm, adjustable presser foot pressure, drop-in bobbin system, LED light, and accessory storage.

Installation & Setup

Unpack and inspect contents. Place on a stable, flat surface.

1. Remove all packaging materials and protective covers.
2. Attach the foot controller to the machine's port.
3. Plug the power cord into a grounded electrical outlet.
4. Install the needle: Loosen needle clamp screw, insert needle with flat side to the back, tighten screw.
5. Attach the presser foot: Lower presser foot lever, align foot with shank, and lower the lever to lock.

WARNING! Keep fingers away from moving parts. Unplug machine when not in use or during maintenance.

First-Time Use

Power on the machine; follow these steps to begin sewing.

1. Wind the bobbin: Place thread spool on spool pin, guide thread through bobbin winding tension disc, and wind bobbin evenly.
2. Insert bobbin: Open bobbin cover, drop bobbin into case with thread unwinding counterclockwise, pull thread through slot.
3. Thread the upper thread: Use automatic needle threader or follow threading guide from spool to needle.
4. Raise presser foot and pull both threads under the foot toward the back.
5. Select a stitch using the stitch selector dial.
6. Test sew on a scrap fabric to adjust tension and stitch settings.

CAUTION! Always start with the needle in the highest position. Keep hands clear of the needle area while sewing.

Specifications

• Model: Singer 3314C
• Stitches: 14 built-in stitches
• Stitch Length: Adjustable up to 4mm
• Stitch Width: Adjustable up to 5mm
• Speed: Up to 750 stitches per minute
• Bobbin: Class 15 transparent bobbin
• Needle: Singer 2020 or 15x1 needles
• Power Supply: 110-120V, 60Hz
• Dimensions: 15.2" x 6.7" x 12.2" (with free arm)
• Weight: 13.2 lbs

Controls and Settings

Access controls via front panel and dials. Front Panel: Power switch, stitch selector dial, stitch length dial, stitch width dial, reverse stitch button.

Stitch Selector Dial: Turn to choose from 14 stitch patterns. Stitch Length Dial: Adjust from 0-4mm. Stitch Width Dial: Adjust from 0-5mm for zigzag and decorative stitches. Reverse Stitch Button: Hold to sew in reverse for securing seams. Presser Foot Pressure Dial: Adjust for light to heavy fabrics.

Stitch Selection & Adjustments

Select stitches based on fabric type and project needs.

1. Straight Stitch: For seams, topstitching; adjust length for fabric weight.
2. Zigzag Stitch: For finishing edges, appliqué; adjust width and length.
3. Blind Hem Stitch: For nearly invisible hems; use blind hem foot.
4. Decorative Stitches: For embellishments; use appropriate foot and stabilizer.
5. Buttonhole Stitch: One-step buttonhole; use buttonhole foot.

Tip: Always test stitch settings on a fabric scrap before starting your project.

Threading & Bobbin Winding

Proper threading ensures smooth operation and stitch quality.

1. Upper Threading: Follow numbered guides from spool pin to needle. Use automatic needle threader by pushing lever down and hooking thread through needle eye.
2. Bobbin Winding: Place spool on pin, thread through guide, wrap thread around bobbin clockwise, engage bobbin winder, and press foot controller.
3. Bobbin Insertion: Open cover, drop bobbin in with thread unwinding counterclockwise, pull thread through slot and under tension spring.
4. Drawing Up Bobbin Thread: Hold upper thread, turn handwheel toward you until needle goes down and up, pull upper thread to bring bobbin thread up through needle plate.

WARNING! Ensure machine is off when threading. Keep threads free of knots and tangles.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Unplug machine before cleaning.
2. Remove needle plate and bobbin case to clean lint and dust with brush.
3. Oil moving parts as per manual instructions (use only Singer sewing machine oil).
4. Wipe exterior with a soft, dry cloth.
5. Replace needle regularly (after every 8-10 hours of sewing).

CAUTION! Do not use compressed air or liquid cleaners. Store in a dry, dust-free place.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Copyright © 2025 Singer Manufacturing Company. All rights reserved. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Reset: Unplug machine for 5 minutes to reset electronic components.

Service: 1-800-4-SINGER; www.singer.com