Singer Sewing Machine 2277 Manual

The Singer 2277 is a versatile mechanical sewing machine designed for home use, featuring 23 built-in stitches, a 4-step buttonhole, adjustable stitch length and width, free arm capability, built-in needle threader, top drop-in bobbin system, and reverse sewing function. This manual covers essential information for setup, operation, maintenance, and troubleshooting of your Singer 2277 sewing machine.

Features at a Glance

Key components: Main body with free arm, stitch selection dial, stitch length/width controls, built-in needle threader, top drop-in bobbin system, accessory storage, foot pedal, power cord, and accessory kit.

Unpacking & Setup

Carefully unpack all components and place machine on stable surface.

1. Remove machine from box and all protective materials.
2. Place machine on sturdy table or sewing cabinet.
3. Attach foot pedal to machine connector.
4. Plug power cord into machine and wall outlet.
5. Install needle (flat side toward back) and tighten screw.
6. Install bobbin and thread machine following threading guide.

WARNING! Machine is heavy; lift with care. Ensure work area is well-lit and free of obstacles.

Getting Started

Basic setup for first-time use.

1. Power on: Connect to power source and turn on power switch.
2. Thread machine: Follow numbered threading path on machine.
3. Wind bobbin: Place thread on spool pin and wind bobbin using bobbin winding mechanism.
4. Insert bobbin: Drop bobbin into bobbin case with thread pulling counterclockwise.
5. Select stitch: Turn stitch selection dial to desired stitch pattern.
6. Test sew: Use scrap fabric to test stitch and tension settings.

CAUTION! Keep fingers away from needle area during operation. Always turn power off when threading or changing needle.

Technical Specifications

• Model: Singer 2277
• Type: Mechanical Sewing Machine
• Stitches: 23 built-in stitches
• Buttonhole: 4-step manual buttonhole
• Stitch Length: 0-4 mm adjustable
• Stitch Width: 0-5 mm adjustable
• Speed: Up to 750 stitches per minute
• Bobbin: Class 15 transparent bobbin
• Needle: Singer system 130/705H
• Power: 110V, 60Hz (US/Canada)
• Dimensions: 15.2" x 6.7" x 12.2"
• Weight: 13.2 lbs

Machine Controls & Functions

Main controls located on front and right side of machine.

Front Panel: Stitch selection dial, stitch length control, stitch width control, reverse sewing lever, bobbin winder, spool pins.

Right Side: Handwheel, power switch, power cord socket, foot pedal connector.

Accessories Included: All-purpose foot, zipper foot, buttonhole foot, button sewing foot, seam ripper, needles, bobbins, screwdriver, lint brush, spool cap, auxiliary spool pin.

Stitch Selection & Settings

Select stitches using dial and adjust settings for optimal results.

1. Turn stitch selection dial to desired stitch number (1-23).
2. Adjust stitch length: Higher numbers for longer stitches, lower for shorter.
3. Adjust stitch width: For zigzag and decorative stitches only.
4. Set presser foot pressure: Adjust dial for lightweight or heavyweight fabrics.
5. Select appropriate presser foot for stitch type.
6. Test on scrap fabric before starting project.

Tip: Refer to stitch guide on machine for recommended settings for each stitch.

Threading & Bobbin Winding

Proper threading is essential for good stitch quality.

1. Raise needle to highest position using handwheel.
2. Place thread spool on spool pin with cap.
3. Follow numbered threading path: Through thread guide, tension discs, take-up lever, and finally through needle.
3. Use built-in needle threader: Lower lever and hook thread through needle eye.
4. Wind bobbin: Place empty bobbin on winder, engage bobbin winding mechanism, press foot pedal.
5. Insert bobbin: Drop bobbin into case with thread pulling counterclockwise, pull thread through slot.

WARNING! Always thread with presser foot raised to engage tension discs properly.

Basic Sewing Techniques

Fundamental sewing operations with Singer 2277.

1. Straight stitch: Select stitch 1, set length 2.5-3.0 for medium weight fabrics.
2. Zigzag stitch: Select stitch 2-6, adjust width for desired zigzag pattern.
3. Buttonhole: Use 4-step process with buttonhole foot; practice on scrap fabric first.
4. Reverse sewing: Hold reverse lever to sew backwards for reinforcement.
5. Free arm sewing: Remove accessory tray for sewing sleeves and cuffs.
6. Gathering: Use longer stitch length (3.5-4.0) and pull bobbin thread.

CAUTION! Always start with needle in highest position. Never pull fabric while sewing.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Unplug machine before cleaning or maintenance.
2. Remove needle plate and clean lint from feed dog area.
3. Clean bobbin area with lint brush after each project.
4. Oil machine as directed in manual (specific points only).
5. Replace needle regularly (after 8-10 hours of sewing).
6. Cover machine when not in use to prevent dust accumulation.

CAUTION! Use only Singer recommended oil. Never use compressed air to clean machine.

Safety Information

Important safety precautions for sewing machine use.

• Always unplug machine when not in use, during threading, or when changing needle.
• Keep fingers away from moving parts, especially needle area.
• Do not sew over pins; remove pins before they reach presser foot.
• Use proper lighting to see sewing area clearly.
• Keep hair, loose clothing, and jewelry away from moving parts.
• Do not use machine if cord or plug is damaged.
• Supervise children when machine is in use.
• Store machine in dry area away from heat sources.

Troubleshooting

Service: For technical support, contact Singer Customer Service at 1-800-4-SINGER or visit www.singer.com

Warranty: Singer 2277 comes with 25-year limited warranty. Register product online for warranty activation.