singer sewing machine 2250 instruction manual

The Singer 2250 is a versatile free-arm sewing machine designed for home use, featuring a variety of built-in stitches, adjustable stitch length and width, automatic needle threading, a drop-in bobbin system, and multiple presser feet for different sewing techniques. It operates on standard household power and includes essential accessories. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Free-arm sewing machine body, Foot Controller, Power Cord, Assorted Presser Feet, Bobbins, Needles, Seam Ripper/Lint Brush, Instruction Manual.

Unpacking and Setup

Unpack all contents and inspect for damage. Place machine on a stable, well-lit table.

1. Attach Foot Controller: Plug controller cord into machine port (usually on right side).
2. Connect Power: Plug power cord into machine and then into a 120V AC outlet.
3. Install Needle: Loosen needle clamp screw, insert needle with flat side to the back, tighten screw.
4. Attach Presser Foot: Raise presser foot lever, snap on desired foot (usually All-Purpose first).
5. Wind Bobbin: Follow bobbin winding instructions in manual.

WARNING! Keep fingers away from needle area during operation. Unplug machine when not in use or when changing needles/feet.

First-Time Operation

Plug in power, turn on light switch, and practice on scrap fabric.

1. Thread Machine: Follow threading path marked on machine; use automatic needle threader if available.
2. Insert Bobbin: Place wound bobbin in bobbin case, pull thread through slot and under tension spring.
3. Raise Bobbin Thread: Hold upper thread, turn handwheel toward you to bring bobbin thread up.
4. Select Stitch: Turn stitch selector dial to straight stitch (position 0).
5. Test Sew: Place fabric under presser foot, lower foot, and gently press foot controller to sew.

CAUTION! Always start with needle at highest position. Do not force fabric; let feed dogs move it.

Specifications

• Model: Singer 2250.
• Stitches: Multiple built-in stitches including utility and decorative.
• Stitch Length: Adjustable up to 4mm.
• Stitch Width: Adjustable up to 5mm for zigzag.
• Bobbin: Class 15 transparent bobbin.
• Needle: Standard domestic sewing machine needles (size 11/80 recommended for general use).
• Max Sewing Speed: Adjustable via foot controller.
• Power Source: 120V AC, 60Hz.
• Weight: Approximately 11 lbs (5 kg).

Controls and Functions

Main Controls: Stitch Selector Dial, Stitch Length Dial, Stitch Width Dial, Reverse Stitch Lever, Handwheel, Presser Foot Lever, Bobbin Winder, Light Switch.

Operation: Use Foot Controller for speed; handwheel for manual needle positioning. Reverse Lever: Hold down to sew backwards for reinforcement. Stitch Dials: Set length (short for basting, long for gathering) and width (0 for straight, wider for zigzag).

Stitch Selection and Settings

Select stitch pattern with dial; adjust length/width as needed.

1. Straight Stitch: Dial to 0; length 2.5mm for general sewing.
2. Zigzag Stitch: Dial to zigzag symbol; adjust width for satin stitch or overcasting.
3. Buttonhole: Use buttonhole foot and follow marked steps (often a 4-step process).
4. Decorative Stitches: Select pattern; test on scrap to ensure proper tension.

Tip: Refer to stitch guide on machine or manual for recommended settings for different fabrics.

Threading and Bobbin Winding

Correct threading is essential for proper stitch formation.

1. Upper Threading: Place spool on pin, follow numbered path, thread through tension discs, take-up lever, and finally needle (use auto-threader if equipped).
2. Bobbin Winding: Place empty bobbin on winder, thread from spool through guide, wrap around bobbin, push bobbin to engage winding, hold thread end, press foot controller to wind.
3. Bobbin Insertion: Open bobbin cover, drop in bobbin so thread unwinds counterclockwise, pull thread through slot.
4. Draw Up Bobbin Thread: Hold upper thread, turn handwheel toward you until bobbin thread loops up; pull both threads under presser foot.

WARNING! Ensure presser foot is raised when threading upper thread to engage tension discs.

Presser Feet and Accessories

Each foot is designed for specific tasks. Snap on/off with presser foot lever raised.

Care & Maintenance

Unplug machine before cleaning. Regular maintenance ensures smooth operation.

1. Cleaning: Remove needle plate screws, lift plate, use small brush to remove lint from feed dogs and bobbin area.
2. Oiling: Apply one drop of sewing machine oil to hook race and other moving parts as per manual (do not over-oil).
3. Needle Replacement: Replace bent or dull needles immediately; use correct type for fabric.
4. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Use only sewing machine oil. Never use household oils. Keep machine dry.

Regulatory Information

UL Listed: Complies with safety standards. Copyright © Singer Manufacturing Company. For support, visit www.singer.com or contact customer service. This product is designed for household use only.

Troubleshooting

Reset: Unplug machine for 5 minutes if electronic issues occur.

Service: For repairs, contact authorized Singer service center.