singer model 9432 manual

The Singer Model 9432 is a versatile sewing machine designed for home use, featuring multiple stitch patterns, automatic needle threading, adjustable stitch length and width, built-in buttonhole function, free arm capability, and a durable metal frame. It operates on standard household power (120V AC, 60Hz) and includes essential accessories such as presser feet, bobbins, needles, and a seam ripper. Below are key sections covering safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sewing machine head, foot pedal, power cord, accessory box, and instruction manual.

Unpacking and Setup

Unpack all components and inspect for damage. Place on a stable, level surface.

1. Remove machine from packaging: Lift by the carrying handle, not by the free arm.
2. Attach foot pedal: Connect pedal cord to machine port.
3. Connect power: Plug power cord into machine and then into a 120V AC outlet.
4. Install needle: Loosen needle clamp screw, insert needle with flat side to the back, tighten screw.
5. Attach presser foot: Lift presser foot lever, snap foot into place.

WARNING! Keep fingers away from needle area during setup and operation. Ensure machine is unplugged during needle installation.

First-Time Operation

Plug in machine, turn power switch on, and follow these steps.

1. Wind bobbin: Place thread on spool pin, guide through bobbin winder tension, press bobbin onto winder shaft, and engage winder.
2. Insert bobbin: Open bobbin cover, drop bobbin in with thread unwinding counterclockwise, pull thread through slot.
3. Thread upper thread: Follow numbered threading path on machine, use automatic needle threader if equipped.
4. Select stitch: Turn pattern selector dial to desired stitch.
5. Test sew: Place fabric under presser foot, lower foot, and gently press foot pedal to start sewing.

CAUTION! Always start with needle at highest position. Keep hands clear of moving needle.

Specifications

• Model: Singer 9432.
• Stitches: Multiple built-in patterns including straight, zigzag, and decorative.
• Stitch Length: Adjustable up to 4mm.
• Stitch Width: Adjustable up to 5mm.
• Buttonholes: One-step automatic.
• Needle Positions: Adjustable for straight stitch.
• Free Arm: Yes, removable flatbed.
• Power Requirements: 120V AC, 60Hz.
• Included Accessories: Assorted presser feet, bobbins, needles, seam ripper, brush, screwdriver.
• Warranty: Limited 25-year warranty.

Controls and Settings

Main controls located on front and side of machine. Stitch Selector Dial: Choose stitch pattern. Stitch Length Dial: Adjust from 0 (basting) to 4 (long). Stitch Width Dial: Adjust zigzag and decorative stitch width. Reverse Stitch Lever: Hold down for backstitching. Thread Tension Dial: Adjust for balanced stitches (default 4). Presser Foot Pressure: Adjustable for different fabric weights. Speed Control Slider: Limit maximum sewing speed.

Tip: Refer to stitch guide printed on machine for recommended settings for each stitch.

Stitch Selection and Adjustment

Select stitches using pattern dial; adjust length and width as needed.

1. Straight Stitch: Use for seams, topstitching. Set width to 0, length 2-3.
2. Zigzag Stitch: Use for finishing edges, appliqué. Adjust width and length.
3. Decorative Stitches: Select pattern, test on scrap fabric first.
4. Buttonhole: Select buttonhole stitch, place fabric under foot, lower buttonhole lever, sew automatically.
5. Stretch Stitches: Use for knit fabrics to prevent popped seams.

Note: Always test stitch on fabric scrap before sewing project.

Threading and Bobbin Winding

Proper threading is essential for good stitch quality.

1. Upper Threading: Follow numbered path from spool pin to needle. Use automatic needle threader by pulling lever down.
2. Bobbin Winding: Disengage clutch by pulling handwheel outward. Place thread on spool pin, wind bobbin until full.
3. Bobbin Insertion: Open cover, drop bobbin in with thread unwinding counterclockwise. Pull thread through slot and under tension spring.
4. Drawing Up Bobbin Thread: Hold upper thread, turn handwheel toward you until needle goes down and up, pull upper thread to bring bobbin thread up.

WARNING! Ensure machine is turned off when threading bobbin area. Keep threads free of tangles.

Care & Maintenance

Unplug machine before cleaning. Regular maintenance ensures optimal performance.

1. Cleaning: Remove needle plate and bobbin case. Use small brush to remove lint and dust.
2. Oiling: Apply one drop of sewing machine oil to hook race and other moving parts as indicated in manual (do not over-oil).
3. Needle Replacement: Replace needle after every project or if bent/dull.
4. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Use only sewing machine oil. Do not use household oils. Wipe excess oil before sewing.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Copyright © Singer Manufacturing Company. All trademarks are property of Singer. For support, visit www.singer.com or contact customer service at 1-800-4-SINGER.

Troubleshooting

Reset: Turn machine off and unplug for 30 seconds to reset electronic controls if available.

Service: For repairs not covered in manual, contact authorized Singer service center.