singer model 7033 manual

The Singer Model 7033 is a versatile sewing machine designed for home use, featuring multiple stitch patterns, adjustable stitch length and width, built-in buttonholer, free arm capability, and easy threading system. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sewing machine head, Foot pedal, Power cord, Accessory box (presser feet, bobbins, needles, seam ripper), Instruction manual.

Unpacking and Setup

Unpack and inspect all contents. Place on stable, flat surface.

1. Remove machine from packaging: Carefully lift machine from box.
2. Attach extension table: Slide onto free arm until it clicks into place.
3. Connect foot pedal: Plug into machine socket.
4. Connect power: Plug power cord into machine and wall outlet.
5. Install accessories: Place spool pin, thread guide, and bobbin winder as shown in diagram.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure all connections are secure before plugging in.

First-Time Operation

Power on machine; follow threading guide.

1. Wind bobbin: Place thread on spool pin, guide through bobbin winder, and press pedal.
2. Insert bobbin: Place bobbin in case with thread unwinding clockwise.
3. Thread upper path: Follow numbered guides from spool to needle.
4. Select stitch: Turn dial to desired pattern (straight stitch recommended for first use).
5. Test sew: Place fabric under presser foot, lower foot, and gently press pedal.

CAUTION! Keep fingers away from needle area during operation. Always turn power off when threading or changing accessories.

Specifications

• Model: Singer 7033
• Stitch Patterns: 23 built-in stitches including utility, decorative, and stretch
• Stitch Length: Adjustable up to 4mm
• Stitch Width: Adjustable up to 5mm
• Buttonholes: One-step automatic
• Speed Control: Foot pedal with variable speed
• Needle System: 130/705 H household needles
• Bobbin Type: Class 15 transparent bobbin
• Power Requirements: 110-120V, 60Hz
• Weight: 12.5 lbs (5.7 kg)

Controls and Settings

Main controls located on front and side of machine.

Front Panel: Stitch selection dial, Stitch length control, Stitch width control, Reverse stitch button, Thread tension dial.

Side Controls: Bobbin winder stop, Presser foot lever, Handwheel, Power switch, Light switch.

Stitch Settings: Select pattern with dial; adjust length (0-4) for shorter/longer stitches; adjust width (0-5) for zigzag and decorative stitches. Tension: Adjust dial (1-9) - higher numbers for tighter tension. Presser Foot: Select appropriate foot for stitch type (zigzag foot included).

Basic Sewing Techniques

Straight stitch, zigzag, buttonholes, and finishing techniques.

1. Straight stitch: Select straight stitch pattern (position 1). Adjust length as needed.
2. Zigzag stitch: Select zigzag pattern. Adjust width for seam finishing or appliqué.
3. Buttonholes: Use one-step buttonholer foot. Mark button placement, select buttonhole stitch, and machine completes all four sides automatically.
4. Reverse stitching: Hold reverse lever to secure beginning and end of seams.
5. Free arm sewing: Remove extension table for sewing sleeves, cuffs, and pant legs.

Tip: Always test stitch settings on scrap fabric before sewing your project.

Advanced Functions

Decorative stitches, blind hem, stretch stitches, and twin needle sewing.

1. Decorative stitches: Select decorative patterns (positions 10-23). Use stabilizer for best results.
2. Blind hem: Use blind hem foot and select blind hem stitch. Fold fabric as instructed.
3. Stretch stitches: Use stretch stitches (positions 6-9) for knit fabrics.
4. Twin needle: Install twin needle for parallel rows of stitching. Use zigzag plate opening.
5. Darning: Lower feed dogs for free-motion darning and quilting.

WARNING! Do not force handwheel if machine jams. Turn power off and remove fabric to clear obstruction.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Brush lint from bobbin area and feed dogs.
2. Weekly: Oil machine as indicated in manual (2-3 drops in specified points).
3. Monthly: Clean under needle plate; remove lint from tension discs.
4. Needle replacement: Replace needle after 8-10 hours of sewing or if damaged.
5. Storage: Cover machine when not in use to prevent dust accumulation.

CAUTION! Unplug machine before cleaning or maintenance. Use only Singer-recommended oil.

Regulatory Information

UL Listed: Complies with UL safety standards. FCC Part 15: Class B digital device; complies with interference limits. Copyright © Singer Manufacturing Company. All trademarks are property of Singer. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Reset: Turn machine off and unplug for 30 seconds to reset electronic controls.

Service: 1-800-4-SINGER; www.singer.com for authorized service centers.