Singer HD 6380 Manual

The Singer HD 6380 is a heavy-duty sewing machine designed for home use, featuring a powerful motor, multiple built-in stitches, automatic needle threader, adjustable presser foot pressure, and a variety of accessories for versatile sewing projects. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Heavy-duty metal frame, built-in stitch patterns, automatic needle threader, top drop-in bobbin system, adjustable stitch length and width, free arm capability.

Unpacking and Setup

Unpack and inspect all contents. Place on stable surface.

1. Remove machine from packaging: Lift carefully from carrying case.
2. Install foot controller: Plug into machine port and power outlet.
3. Attach power cord: Connect to machine and wall outlet.
4. Install needle: Use screwdriver to secure needle with flat side to back.
5. Wind bobbin: Follow bobbin winding instructions in manual.
6. Thread machine: Follow threading path indicated on machine.

WARNING! Keep fingers away from needle area during operation. Always unplug when not in use.

First-Time Operation

Plug in machine and turn on power switch.

1. Select straight stitch: Turn stitch selector to straight stitch position.
2. Set stitch length: Adjust to medium setting (2.5-3.0).
3. Test on scrap fabric: Practice stitching on double-layer fabric scrap.
4. Adjust tension: If stitches are uneven, adjust upper thread tension.
5. Practice reverse stitching: Use reverse lever to reinforce stitches.

CAUTION! Always start with needle in highest position. Keep hands clear of moving parts.

Specifications

• Model: Singer HD 6380
• Stitches: Built-in utility, decorative, and stretch stitches
• Stitch Length: Adjustable up to 4mm
• Stitch Width: Adjustable up to 5mm
• Buttonholes: One-step automatic
• Needle Positions: Multiple needle positions available
• Bobbin: Class 15 transparent top drop-in
• Presser Feet: Includes general purpose, zipper, buttonhole, button sewing
• Power: 110V, 60Hz (US model)
• Warranty: 25-year limited warranty

Controls and Functions

Front Panel: Power switch, stitch selector, stitch length dial, stitch width dial, reverse stitch button.

Additional Controls: Handwheel, bobbin winder, thread tension dial, presser foot lifter, free arm release.

Stitch Selection: Turn dial to select desired stitch pattern. Stitch Length: Adjust for shorter or longer stitches. Stitch Width: Adjust for zigzag and decorative stitches. Reverse Stitching: Hold button to sew in reverse. Needle Threader: Pull down lever to automatically thread needle.

Stitch Selection and Settings

Machine includes straight, zigzag, stretch, and decorative stitches.

1. Straight Stitch: For basic sewing and seams.
2. Zigzag Stitch: For finishing edges and sewing stretch fabrics.
3. Decorative Stitches: For embellishments and decorative sewing.
4. Stretch Stitches: For knit fabrics and elastic materials.
5. Buttonhole Stitch: Automatic one-step buttonhole.

Tip: Always test stitch on scrap fabric before sewing your project.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Brush out lint from bobbin area and feed dogs.
2. Weekly: Oil machine according to manual instructions.
3. Monthly: Clean tension discs with soft brush.
4. As needed: Replace needle after 8-10 hours of sewing.
5. Storage: Cover machine when not in use to prevent dust accumulation.

WARNING! Always unplug machine before cleaning or maintenance.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC rules. Copyright © Singer Manufacturing Company. All rights reserved. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Reset: Unplug machine for 5 minutes if electronic issues occur.

Service: 1-800-4-SINGER; www.singer.com