Singer 7200 Series & S800 Manual

The Singer 7200 Series & S800 is a versatile sewing machine line featuring advanced stitching capabilities, automatic needle threading, built-in stitches, adjustable stitch length and width, drop feed for free-motion sewing, and a heavy-duty metal frame. Suitable for beginners and experienced sewers, it supports various fabrics from delicate silks to heavy denim. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sewing machine head, foot pedal, power cord, accessory kit, instruction manual.

Unpacking and Setup

Unpack and inspect all contents. Place on stable, flat surface.

1. Remove machine from packaging: Lift carefully, avoiding sharp edges.
2. Attach foot pedal: Connect to machine port, place on floor.
3. Connect power: Plug power cord into machine and wall outlet (120V AC).
4. Install needle: Use screwdriver to secure needle with flat side to rear.
5. Wind bobbin: Follow threading diagram; place bobbin in case.
6. Thread machine: Use automatic needle threader or manual method.

WARNING! Keep fingers away from needle area during operation. Unplug when not in use.

First-Time Operation

Power on machine; test basic functions.

1. Select straight stitch: Turn stitch selector to straight stitch position.
2. Place fabric: Lower presser foot using lever.
3. Start sewing: Press foot pedal gently to begin.
4. Adjust speed: Use speed control slider for desired pace.
5. Reverse stitch: Press reverse button to secure seam ends.
6. Raise presser foot: Lift lever to remove fabric.

CAUTION! Always turn handwheel toward you (counterclockwise) to avoid timing issues.

Specifications

• Model Series: 7200 Series & S800.
• Stitches: Built-in patterns including utility, decorative, and stretch stitches.
• Stitch Length: Adjustable up to 4mm.
• Stitch Width: Adjustable up to 5mm.
• Needle Positions: Left, center, right adjustment.
• Bobbin: Class 15 transparent bobbin.
• Power Supply: 120V AC, 60Hz.
• Motor: DC servo motor with quiet operation.
• Weight: Approximately 22 lbs (10 kg).
• Warranty: Limited 25-year warranty.

Controls and Settings

Access controls via front panel and dials.

Front Panel: Power switch, stitch selector, stitch length dial, stitch width dial, reverse button, needle up/down button.

Stitch Selection: Turn dial to choose built-in stitches (numbered patterns). Stitch Adjustment: Length dial (0-4mm), width dial (0-5mm). Tension Control: Upper thread tension dial (0-9). Presser Foot: Pressure adjustment knob for fabric thickness. Speed Control: Slider for maximum sewing speed. LED Light: On/off with power switch.

Stitch Selection and Adjustment

Choose stitches for different fabrics and projects.

1. Refer to stitch chart: Match number to desired pattern.
2. Set length/width: Adjust dials based on fabric (longer for basting, shorter for fine fabrics).
3. Test on scrap: Always test stitch on fabric scrap before sewing project.
4. Buttonhole: Use automatic buttonhole foot and follow step-by-step guide.
5. Decorative stitches: Use stabilizer for best results on lightweight fabrics.

Tip: Reduce stitch length for curves and increase for straight seams.

Advanced Functions

Utilize advanced features for specialized techniques.

1. Drop feed: Lower feed dogs for free-motion quilting or darning.
2. Needle up/down: Set needle to stop in up or down position.
3. Twin needle: Install for parallel rows of stitching (use zigzag plate).
4. Mirror imaging: Create symmetrical decorative stitches (certain models).
5. Memory function: Store frequently used stitch settings (S800 models).

WARNING! Do not use bent or damaged needles. Replace regularly.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Unplug machine before cleaning.
2. Remove needle plate: Use screwdriver to access bobbin area.
3. Clean lint: Use small brush to remove lint from feed dogs and bobbin case.
4. Oil machine: Apply sewing machine oil to designated points (see diagram) every few months.
5. Exterior cleaning: Wipe with soft, dry cloth.

CAUTION! Never use compressed air; it can force lint deeper into mechanism.

Accessories

Included accessories enhance sewing capabilities.

Regulatory Information

UL Listed: Complies with safety standards. FCC Part 15: Class B digital device; may not cause harmful interference. Copyright © Singer Manufacturing Company. Trademarks owned by Singer. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-4-SINGER; www.singer.com for authorized service centers.