Singer 6380 Sewing Machine Manual

The Singer 6380 is a versatile electronic sewing machine designed for home use, featuring 80 built-in stitches, automatic needle threader, adjustable stitch length and width, built-in buttonhole, drop feed for free-motion sewing, and variable speed control. Powered by standard household current. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic sewing machine with LCD display, foot pedal, power cord, accessory kit, and instruction manual.

Unpacking and Setup

Unpack and inspect all contents. Place on stable, flat surface.

1. Remove machine from packaging: Lift carefully from case.
2. Attach power cord: Plug into machine and wall outlet.
3. Install foot pedal: Connect to machine port and place on floor.
4. Install needle: Use screwdriver to secure needle with flat side to back.
5. Wind bobbin: Follow bobbin winding instructions.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure all connections are secure before powering on.

First-Time Operation

Power on machine; follow initial setup steps.

1. Thread machine: Follow threading path indicated on machine.
2. Insert bobbin: Place bobbin in case with thread unwinding clockwise.
3. Select stitch: Use stitch selection dial or buttons.
4. Test sew: Use scrap fabric to adjust tension and stitch settings.
5. Adjust settings: Modify stitch length/width as needed for project.

CAUTION! Keep fingers away from needle area during operation. Always turn off when threading or changing accessories.

Specifications

• Model: Singer 6380 Electronic Sewing Machine
• Stitches: 80 built-in stitches (6 basic, 8 stretch, 66 decorative)
• Buttonholes: One-step automatic buttonhole
• Stitch Length: Adjustable up to 4mm
• Stitch Width: Adjustable up to 5mm
• Speed: Up to 750 stitches per minute
• Needle Positions: Left, center, right
• Presser Feet: Includes general purpose, zipper, buttonhole, button sewing feet
• Power Source: 110-120V AC, 60Hz
• Warranty: 25-year limited warranty

Controls and Settings

Access functions via control panel. Front Panel: Power switch, stitch selection dial, stitch length/width controls, reverse button, needle up/down button.

LCD Display: Shows stitch number, length, width settings. Stitch Selection: Turn dial to choose stitch (1-80). Stitch Length: Adjust from 0-4mm. Stitch Width: Adjust from 0-5mm. Reverse: Hold button for backstitching. Needle Position: Set needle to up or down position automatically.

Tension Control: Adjust thread tension dial (usually 4-5 for normal sewing). Presser Foot Pressure: Adjust lever for thick or thin fabrics.

Threading and Bobbin

Proper threading is essential for good stitch quality.

1. Raise needle to highest position using handwheel.
2. Place spool on spindle; follow numbered threading path.
3. Use automatic needle threader: Lower lever, hook thread, raise lever.
4. Wind bobbin: Place empty bobbin on winder, guide thread, engage winder.
5. Insert bobbin: Open cover, place bobbin with thread unwinding clockwise.
6. Pull up bobbin thread: Hold needle thread, turn handwheel to bring up bobbin thread.

Tip: Always thread with presser foot raised to open tension discs.

Stitch Selection and Use

Supports various stitches for different applications.

1. Basic stitches: Straight stitch (1-3), zigzag (4), blind hem (5-6).
2. Decorative stitches: Select stitches 7-72 for decorative patterns.
3. Stretch stitches: Use stitches 73-80 for knit fabrics.
4. Buttonhole: Select buttonhole stitch, place fabric under foot, start machine.
5. Adjust settings: Modify length/width for fabric type and project needs.
6. Test first: Always test stitch on scrap fabric before sewing project.

WARNING! Do not force fabric; let feed dogs move it. Use appropriate needle for fabric type.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Unplug machine before cleaning.
2. Remove needle plate: Clean lint from bobbin area with brush.
3. Oil machine: Apply sewing machine oil to designated points (see diagram).
4. Clean exterior: Use soft, dry cloth only.
5. Replace needle regularly: Every 8-10 hours of sewing or for new project.

CAUTION! Never use compressed air; it can force lint deeper into machine. Use only sewing machine oil.

Accessories

Standard accessories included:

• General Purpose Foot
• Zipper Foot
• Buttonhole Foot
• Button Sewing Foot
• Darning/Embroidery Foot
• Seam Ripper/Lint Brush
• Needles (assorted sizes)
• Bobbin (4 extra)
• Screwdriver
• Spool Pin Felt

Additional accessories available for purchase: quilting foot, walking foot, rolled hem foot, blind hem foot.

Regulatory Information

UL Listed: Complies with UL safety standards. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Singer Manufacturing Company. For support, visit www.singer.com or contact 1-800-4-SINGER. Warranty: 25-year limited warranty covers mechanical parts; 2-year warranty covers electrical components.

Troubleshooting

Reset: Turn machine off, unplug for 60 seconds, then restart.

Service: 1-800-4-SINGER; www.singer.com for authorized service centers.