Singer 600 Stitch Manual

The Singer 600 Stitch is a versatile sewing machine designed for home use, featuring 600 built-in stitches including utility, decorative, and alphabets. It offers automatic needle threading, adjustable stitch length and width, built-in needle plate, drop feed for free-motion sewing, automatic bobbin winding, speed control slider, LCD display, and a wide range of presser feet. Powered by 120V AC, 60Hz. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Operation 4. Specifications 5. Controls and Settings 6. Stitch Selection and Adjustment 7. Advanced Functions 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: LCD display, stitch selection dial, automatic needle threader, bobbin winder, speed control slider, presser foot lever, reverse button, thread cutter.

Feature	Description
Stitch Selection Dial	Selects from 600 built-in stitches
LCD Display	Shows selected stitch number and settings
Automatic Needle Threader	Threads needle with ease
Bobbin Winder	Automatically winds bobbin
Speed Control Slider	Adjusts sewing speed
Presser Foot Lever	Raises and lowers presser foot
Reverse Button	Sews in reverse for securing stitches
Thread Cutter	Built-in cutter for convenience
Drop Feed	Lowers feed dogs for free-motion sewing
Needle Plate	Guides fabric with seam guides

Unpacking and Setup

Unpack and inspect contents. Place on stable surface.

Remove machine from box: Lift by base, not by handwheel.
Attach power cord: Plug into machine and wall outlet.
Install foot controller: Connect to machine port.
Insert needle: Loosen needle clamp screw, insert needle flat side back, tighten.
Wind bobbin: Place bobbin on winder, thread through guide, press pedal.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure all connections are secure.

First-Time Operation

Power on machine; follow setup steps.

Thread machine: Follow threading diagram; use automatic needle threader.
Insert bobbin: Place bobbin in case, pull thread through slot.
Select stitch: Turn dial to desired stitch number.
Adjust settings: Set stitch length and width as needed.
Test sew: Use scrap fabric to check tension and stitch.

CAUTION! Keep fingers away from needle during operation. Unplug when not in use.

Specifications

Stitches: 600 built-in (utility, decorative, alphabets).
Stitch Length: Adjustable up to 5mm.
Stitch Width: Adjustable up to 7mm.
Speed: Up to 850 stitches per minute.
Needle: HAx1 sewing system needle.
Bobbin: Class 15 transparent bobbin.
Presser Feet: Includes zigzag, buttonhole, zipper, blind hem, more.
Power Source: 120V AC, 60Hz.
Weight: Approx. 22 lbs (10 kg).

Controls and Settings

Access settings via dial and buttons. Front Panel: Power switch, stitch selection dial, LCD, reverse button, thread cutter.

Stitch Adjustment: Length dial (0-5mm), width dial (0-7mm).

LCD Display: Shows stitch number, length, width. Needle Position: Up/down button. Tension: Adjust dial (0-9). Drop Feed: Lever to lower feed dogs. Speed Control: Slider for slow to fast sewing.

Stitch Selection and Adjustment

Select from 600 stitches: utility (straight, zigzag), decorative, alphabets.

Turn stitch dial to desired number.
Check LCD for stitch details.
Adjust length/width as needed.
Test on scrap fabric.
Use reverse button to secure start/end.

Tip: Refer to stitch chart for recommended settings for each stitch type.

Advanced Functions

Automatic Buttonhole: One-step buttonhole with sensor. Free-Motion Sewing: Drop feed dogs, use darning foot. Monogramming: Select alphabet stitches, adjust spacing. Mirror Imaging: Flip stitch horizontally. Memory: Save favorite stitch settings.

Buttonhole: Attach buttonhole foot, select stitch, place button in holder.
Free-Motion: Lower feed dogs, attach darning foot, move fabric manually.
Alphabets: Select letter, adjust size, sew slowly for clarity.

WARNING! Use correct foot for each function to avoid damage.

Maintenance & Cleaning

Unplug before cleaning. Remove lint with brush; oil as per manual.

Clean feed dogs and bobbin area after each project.
Oil moving parts every few months (use sewing machine oil only).
Check needle regularly; replace if bent or dull.
Cover machine when not in use to prevent dust.

CAUTION! Do not use compressed air; it can force lint into mechanism.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Singer; trademarks of Singer Licensing Company. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not running	Power cord/foot controller	Check power connection; ensure foot controller plugged in.
Thread bunching underneath	Incorrect threading/bobbin	Re-thread top and bobbin; ensure bobbin inserted correctly.
Needle breaking	Wrong needle/bent needle	Replace with correct needle type; ensure inserted fully.
Stitches skipping	Dull needle/thread tension	Replace needle; adjust tension dial.
LCD not displaying	Power issue	Check power source; restart machine.

Reset: Turn off and unplug for 30 seconds, then restart.

Service: 1-800-4-SINGER; www.singer.com