Manual for Singer Sewing Machine C7290Q

The Singer C7290Q is a versatile electronic sewing machine designed for home use, featuring a wide range of built-in stitches, automatic needle threader, top drop-in bobbin, adjustable stitch length and width, free arm capability, and multiple presser feet for various sewing techniques. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electronic control panel, Built-in stitch selection, Automatic needle threader, Top drop-in bobbin system, Free arm, Accessory storage, Foot pedal, Power cord.

Unpacking and Setup

Carefully unpack all components and place on a stable, flat surface.

1. Remove machine and accessories from packaging.
2. Attach the free arm (if detached) by sliding into place.
3. Connect the foot pedal to the machine port.
4. Plug the power cord into the machine and then into a 120V AC outlet.
5. Install the needle and presser foot as described in the Getting Started section.

WARNING! Keep fingers away from the needle area during setup and operation. Ensure the machine is unplugged when attaching accessories.

Getting Started

Power on the machine; the LED light will illuminate.

1. Winding the Bobbin: Place thread on spool pin, guide through tension disc, wind onto bobbin using bobbin winder.
2. Inserting the Bobbin: Place bobbin into the top drop-in case with thread running counterclockwise.
3. Threading the Upper Thread: Follow numbered path on machine; use automatic needle threader lever.
4. Selecting a Stitch: Turn the stitch selection dial to desired pattern.
5. Adjusting Tension: Refer to fabric guide; adjust upper thread tension dial if needed.

CAUTION! Always raise the needle to its highest position before threading or changing presser feet.

Specifications

• Model: Singer C7290Q.
• Type: Electronic Sewing Machine.
• Built-in Stitches: 100+ stitches including 6 auto buttonholes.
• Stitch Length: Adjustable up to 4mm.
• Stitch Width: Adjustable up to 5mm.
• Bobbin: Top drop-in, Class 15 transparent.
• Needle: Standard domestic needle, system 130/705H.
• Presser Feet: Included: All-purpose, zipper, buttonhole, button sewing, blind hem, overcasting.
• Power Supply: 120V AC, 60Hz.
• Warranty: 25-year limited warranty.

Controls and Functions

Control Panel: Stitch selection dial, Stitch length dial, Stitch width dial, Reverse stitch lever, Speed control slider.

Front Panel: Power switch, Bobbin winder spindle, Spool pins, Thread tension dial, Presser foot lifter, Handwheel.

Stitch Selection: Turn dial to select from numbered stitch patterns (refer to stitch chart). Stitch Length: 0-4mm adjustment for shorter/longer stitches. Stitch Width: 0-5mm adjustment for zigzag and decorative stitches. Reverse Stitch: Hold lever to sew backwards for seam reinforcement. Speed Control: Slide to limit maximum sewing speed for better control.

Basic Sewing Operations

Straight Stitch, Zigzag, and basic techniques.

1. Place fabric under presser foot, lower the presser foot lifter.
2. Gently press foot pedal to start sewing; guide fabric with hands.
3. Use reverse lever at beginning and end of seam to lock stitches.
4. Raise presser foot and pull fabric back to cut thread using built-in thread cutter.
5. For free arm sewing: Remove accessory tray to access free arm for cylindrical items.

Tip: Practice on scrap fabric first to adjust tension and stitch settings.

Using Built-in Stitches

Includes utility, stretch, decorative, and buttonhole stitches.

1. Select stitch using dial (refer to stitch guide).
2. Adjust length and width as needed for fabric and pattern.
3. For buttonholes: Attach buttonhole foot, select buttonhole stitch, place fabric, and start sewing; machine will sew one complete buttonhole automatically.
4. For decorative stitches: Use stabilizer underneath lightweight fabrics.
5. For stretch stitches: Use for knit fabrics to prevent popped seams.

WARNING! Always use the correct presser foot for the selected stitch to avoid damage.

Maintenance & Cleaning

Unplug machine before cleaning. Remove lint and dust regularly.

1. Remove needle plate screws and clean feed dog area with brush.
2. Clean bobbin case area with small brush.
3. Oil machine as per manual instructions (sparingly at designated points).
4. Wipe exterior with soft, dry cloth.

CAUTION! Do not use compressed air or liquids for cleaning. Never oil without unplugging.

Safety Information

Always unplug when not in use, during threading, needle changes, or cleaning. Keep fingers away from moving parts. Do not sew over pins. Use proper lighting. Keep out of reach of children. For support, visit www.singer.com or contact 1-800-4-SINGER.

Troubleshooting

Reset: Unplug machine for 60 seconds to reset electronic components if malfunction occurs.

Service: 1-800-4-SINGER; www.singer.com