Instruction Manual for Singer C7220

The Singer C7220 is a versatile sewing machine designed for home use, featuring multiple stitch patterns, adjustable stitch length and width, automatic needle threader, built-in buttonhole function, free arm capability, and variable speed control. It is powered by standard household electricity and includes essential accessories for basic sewing tasks. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Sewing machine head, foot pedal, power cord, accessory box with presser feet, bobbins, needles, and seam ripper.

Unpacking and Setup

Carefully unpack all components. Place machine on a stable, flat surface.

1. Remove machine from packaging and accessory box.
2. Attach power cord to machine and plug into a grounded outlet.
3. Install foot pedal and connect to machine.
4. Install needle: Loosen needle clamp screw, insert needle with flat side to the back, tighten screw.
5. Wind bobbin: Place thread on spool pin, guide thread through bobbin winding tension disk, and engage bobbin winder.
6. Insert bobbin into bobbin case following diagram in manual.

WARNING! Keep fingers away from needle area during operation. Ensure machine is unplugged during setup when handling needles.

First-Time Operation

Power on machine; familiarize yourself with controls.

1. Thread the machine: Follow numbered threading path on machine; use automatic needle threader if equipped.
2. Select a stitch: Turn stitch selection dial to desired pattern (e.g., straight stitch).
3. Adjust stitch length and width as needed.
4. Place fabric under presser foot, lower presser foot lever.
5. Gently press foot pedal to start sewing.
6. Practice on scrap fabric to adjust tension and stitch appearance.

CAUTION! Always turn handwheel toward you (counterclockwise) to avoid timing issues. Never force the handwheel.

Specifications

• Model: Singer C7220
• Stitch Patterns: 22 built-in stitches
• Stitch Length: Adjustable up to 4mm
• Stitch Width: Adjustable up to 5mm
• Buttonholes: 1-step automatic
• Needle Positions: Left, center, right
• Free Arm: Yes
• Power Supply: 110-120V, 60Hz
• Machine Weight: Approx. 12 lbs (5.4 kg)
• Included Accessories: All-purpose foot, zipper foot, buttonhole foot, needle set, bobbins, seam ripper, lint brush, screwdriver

Controls and Functions

Main Controls: Stitch selection dial, stitch length dial, stitch width dial, reverse stitch lever, handwheel, presser foot lever, bobbin winder.

Operation Panel: Power switch, stitch pattern indicators, LED light button (if applicable).

Stitch Selection: Turn dial to select from straight, zigzag, stretch, and decorative stitches. Stitch Adjustment: Use length dial (0-4) and width dial (0-5) for customization. Tension Control: Upper thread tension dial (usually set to 4 for normal fabrics). Bobbin Winding: Engage bobbin winder; disengages automatically when full.

Stitch Selection and Adjustment

Select stitch based on fabric and project type.

1. Straight Stitch: For seams, topstitching; adjust length for fabric weight.
2. Zigzag Stitch: For finishing edges, appliqué; adjust width for desired effect.
3. Decorative Stitches: For embellishment; consult stitch chart for patterns.
4. Buttonhole Stitch: Use buttonhole foot; machine automatically sews all four sides.
5. Stretch Stitches: For knit fabrics to prevent seam popping.

Tip: Always test stitch settings on a fabric scrap before sewing your project.

Basic Sewing Techniques

Follow these steps for common sewing tasks.

1. Seams: Align fabric edges, lower presser foot, sew with selected stitch.
2. Hems: Fold fabric edge twice, press, and stitch close to inner fold.
3. Zippers: Use zipper foot; baste zipper tape first, then stitch permanently.
4. Buttons: Use buttonhole function to create opening, then sew button by hand or with machine if equipped.
5. Gathering: Use long straight stitch, pull bobbin thread to gather fabric evenly.
6. Free Arm Sewing: Remove accessory tray to sew sleeves, cuffs, and other tubular items.

WARNING! Keep fingers clear of moving needle. Use seam ripper carefully to avoid damaging fabric.

Maintenance and Cleaning

Regular maintenance ensures optimal performance.

1. Unplug machine before cleaning.
2. Remove needle plate and bobbin case to clean lint and dust with brush.
3. Oil machine as per manual instructions (if required).
4. Wipe exterior with soft, dry cloth.
5. Store machine covered when not in use.

CAUTION! Do not use compressed air or liquids for cleaning. Never oil without consulting manual.

Safety Information

Important safety precautions for using the Singer C7220.

• Always unplug machine when changing needles, cleaning, or not in use.
• Do not operate with damaged cord or plug.
• Keep hands and loose clothing away from moving parts.
• Use correct needle and thread for fabric type.
• Disconnect power before servicing.
• Keep machine out of reach of children.

For electrical safety, ensure outlet is properly grounded.

Troubleshooting

Service: For technical support, contact Singer Customer Service at 1-800-4-SINGER or visit www.singer.com.